Luoyang Zhongtai Industries CO.,LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 3000 Set/Sets per Year |
| Condition | New |
| Model | Mine Ball Mill |
| Product name | MQS Series Ball Mill |
| Type | MQY15×30 |
| REV | 742 r/min |
| Power | 95 kw |
| Classification | Ore Grinding Mill |
| Warranty | 12 months |
| Brand Name | ZTIC |
| Model Number | Ore Grinding Mill |
| Certification | IOS |
| Place of Origin | Henan,China |
View Detail Information
Explore similar products
Simple Installation Sand Making Mining Ball Mill And Ore Grinding Mill
Heavy Duty 165 Units HPGR High Pressure Grinding Rolls and roller mill
High Pressure Shaft Flexible 315 T Roller Mill and roller press
Cement Plant AC Motor and Slag Vertical Mill with capacity 1000tpd
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 3000 Set/Sets per Year |
| Condition | New | Model | Mine Ball Mill |
| Product name | MQS Series Ball Mill | Type | MQY15×30 |
| REV | 742 r/min | Power | 95 kw |
| Classification | Ore Grinding Mill | Warranty | 12 months |
| Brand Name | ZTIC | Model Number | Ore Grinding Mill |
| Certification | IOS | Place of Origin | Henan,China |
| High Light | MQY Ore Grinding Mill ，15×30 Mineral Ball Mill ，MQY Mineral Ball Mill | ||
MQY Series Ball Mill Mineral Processing Ball Mill Of Ore Grinding Mill
1. Luo mine ball mill of Ore Grinding Mill specifications and models are as follows:
(1) Overflow type ball mill: specifications from φ1.5x3.0 ~ φ8x13m, effective volume 7.5 ~ 194.3m3 of various configurations of a variety of specifications;
(2) Lattice ball mill: specifications from φ1.2x2.4 ~ φ4x14m, the effective volume is 2.2 ~ 157m3 of various configurations of a variety of specifications;
2. Typical products of ball mill of Ore Grinding Mill
In 1992, we cooperated with Fuller company to manufacture A ф 5.5×8.5m overflow ball mill; In 1993, manufactured a ф 5.03×6.4m export ball mill; Developed a ф 4.27×6.1m export large mining mill in 2001; In 2004, we cooperated with to manufacture the largest semi-autogenous mill with φ 8.53×3.96. In August 2005, contracted a ф 5.5×8.5m overflow ball mill for Jinchuan Group. In May 2006, it was contracted to manufacture φ 5.49×8.8m overflow ball mill for Angang Group. In 2006, the company cooperated with manufacture the Dahongshan φ 8.54×3.6m self-grinding mill of Kunming Iron and Steel. In July 2006, it was contracted to manufacture φ 8.0 ×2.8 m autogenous mill for Ling Steel Group.
3. Product parameters of ball mill of Ore Grinding Mill
Technical performance table of Luo Mine overflow ball mill
| Model | Cylinder diameter | Cylinder length | Effective volume | Rotate speed | Load of grinding media | Drive mode | Motor | Dimension (L×W×H) | Approx weight | Note | |
| Power | Rev | ||||||||||
| mm | mm | m3 | r/min | t | kw | r/min | m | t | |||
| MQY15×30 | 1500 | 3000 | 5 | 26.6 | 9 | Edge | 95 | 742 | 7.4×3.4×2.8 | 18.5 | Drum feeder |
| MQY15×36 | 1500 | 3600 | 5.7 | 26.6 | 10.6 | 95 | 742 | 8.0×3.4×2.8 | 17.22 | Rubber lining | |
| MQY18×61 | 1830 | 6100 | 13.4 | 24.5 | 24.6 | ‥ | 220 | 736 | 10.2×5.1×4.0 | 37.3 | |
| MQY21×30 | 2100 | 3000 | 9.4 | 22.1 | 15 | ‥ | 200 | 740 | 8.5×4.65×3 | 45 | |
| MQY24×30 | 2400 | 3000 | 12.2 | 21 | 22.5 | ‥ | 250 | 980 | 8.8×4.7×4.4 | 55 | |
4. The technical characteristics of ball mill of Ore Grinding Mill:
(1) Cylinder mill adopts the transmission form of edge flyers, center transmission, multi-point meshing edge transmission and other transmission types; The driving form is asynchronous motor + reducer + pinion + big gear and synchronous motor + air clutch + pinion + big gear;
(2) The general use of two static and dynamic pressure bearing support mode, the use of fully enclosed self-alcolating 1200 line contact 'rocker type' bearings, can also use single sliding track, double sliding track static and dynamic pressure support or full static pressure support;
(3) Large open gear adopts American AGMA standard design, equipped with a reliable sealing gear housing, with automatic spray lubrication device glycerin;
(4) Cylinder is the key part of the mill. Finite element analysis is carried out by computer to ensure the reliability of its use.
(5) Large and medium-sized mill equipped with slow driving device;
(6) Large and medium-sized mill equipped with high and low pressure lubrication station;
(7) Control and protection system adopts PLC control.
Company Details
Business Type:
Manufacturer
Year Established:
1981
Total Annual:
80 million-100 million
Employee Number:
500~1000
Ecer Certification：
Verified Supplier
Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st... Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st...
Get in touch with us
Leave a Message, we will call you back quickly!