The Half Structure And Y Type Plate Mill Girth Gear For Ball Mill

Product Specification

The Half Structure And Y Type Plate Mill Girth Gear For Ball Mill

1. Manufacturing process of big tooth ring for mill girth gear

(1) Blank

The steel casting blank is provided by the heavy casting and forging Plant of CITIC Heavy Industry Machinery Co., LTD. It is implemented in accordance with gb11352-89 standard. Molding, smelting, pouring, box beating, cleaning and dressing castings according to casting process requirements; During the inspection and acceptance, the cast steel blank shall be checked according to the drawings and technical requirements, and the process shall be put down after passing the acceptance according to JB/T6402-92 standard.

(2) Rough machining

Draw lines according to the requirements of the drawings and set aside processing allowance, alignment, connection, processing inner and outer circle, milling joint surface, drilling and other processes.

(3) Agent injury

Ultrasonic inspection shall be carried out on the whole, and the internal quality shall meet the secondary requirements of GB7233-87 standard.

(4) Normalizing pretreatment

The half ring is normalized and tempered in pairs to provide good microstructure for subsequent surface quenching. And according to the requirements of the drawings to check the deformation of half gear ring after heat treatment.

(5) Machining

The first two half ring with high strength bolt connection into a whole ring, according to the requirements of the drawings processing of the whole ring circle and upper and lower end, and then according to the drawings and machining requirements for milling teeth.

(6) Eliminate machining stress

The integral ring is annealed to eliminate stress.

(7) Surface quenching of integral gear ring

Tooth surface medium frequency induction quenching along the tooth groove, hardness HRC50~55, effective hardening layer depth 3~5mm.

(8) Final inspection

Firstly, test whether the hardness of each groove of the gear ring after intermediate frequency quenching and tempering meets the requirements of the drawing; Secondly, detect whether the size of the maximum outer diameter D6944 is too large, such as the deformation of 3mm, need mechanical correction until qualified; Thirdly, for magnetic particle inspection of gear teeth and transition fillet, the quality should meet the secondary requirements stipulated in GB/T9444-88 standard; Finally, according to the drawings and technical requirements for the final inspection.

2. Product parameters of big ring for mill girth gear

3. Case introduction of large ring gear

On December 14, 2013, workers in the steel making workshop of CITIC Heavy Industries Co., LTD., Luoyang, Henan Province, are using two packages of 226 tons of steel hydrating mill large ring gear.

On the same day, in the first special mill order for the Laos gold mine project of CITIC Heavy Industries in Luoyang, Henan Province, the first large ring gear piece was smoothly cast in the casting steel workshop of the company, which was the first batch of large-scale mining equipment of CITIC Heavy Industries to explore the Laos market in Southeast Asia.

On January 12, 2014, CITIC Heavy Industries successfully processed AGMAQ10 precision large gear ring. "Q10" is an AGMA Grade 10 precision measure of the state of THE art in the manufacture of large gear rings for today's transmissions.