HUATEC GROUP CORPORATION
| Payment Terms | L/C, Western Union, T/T |
| Supply Ability | 100 sets per month |
| Delivery Time | 7~15 days after payment |
| Packaging Details | in wooden box |
| Product name | Roughness and Contour Tester |
| Model | SRT-680G |
| Measurement Accuracy | X axis 200mm |
| Residual value noise | ≤0.005μm |
| Power | AC 220V±10% 50Hz |
| Meas. Speed | 0.02mm to 4.0mm/s |
| Brand Name | Huatec |
| Model Number | SRT-680G |
| Certification | ISO,CE |
| Place of Origin | China |
View Detail Information
Explore similar products
NDT Non Destructive Testing Equipment , TG4500 Series Ultrasonic Thickness Gauge
Black NDT Non Destructive Testing Equipment , High Voltage Porosity Detector
SPY Holiday Detector Test / Non Destructive Testing Equipment for Pipe Corrosion
Non Destructive Testing Equipment , Wire Rope Inspection Steel Rope Flaw
Product Specification
| Payment Terms | L/C, Western Union, T/T | Supply Ability | 100 sets per month |
| Delivery Time | 7~15 days after payment | Packaging Details | in wooden box |
| Product name | Roughness and Contour Tester | Model | SRT-680G |
| Measurement Accuracy | X axis 200mm | Residual value noise | ≤0.005μm |
| Power | AC 220V±10% 50Hz | Meas. Speed | 0.02mm to 4.0mm/s |
| Brand Name | Huatec | Model Number | SRT-680G |
| Certification | ISO,CE | Place of Origin | China |
| High Light | Contour Tester ，Contour Roughness Tester ，Roughness And Contour Tester | ||
SRT-680G Roughness and Contour Tester
Measurement Principle
● Cartesian coordinates, stylus contacts.
● High precision air floating guide rail –As the measuring datum of X coordinate to guarantee the linear moving accuracy in X direction.
● High precision digital sensor – to get signal of Z coordinate for measuring the profile of various precise mechanical piece part.
● Computer and windows-based measuring program to process the measuring data, easy for printing and filing
Main Function
Dimension:Contains the horizontal distance, vertical distance, linear distance, radius and diameter
Angle: Horizontal Angle, vertical angle, cross angle
Position tolerance: contains the parallelism and perpendicularity
Form tolerance: contains the straightness, crown, circular arc profile
Auxiliary generation: contains the auxiliary point, auxiliary line, auxiliary circle
Roughness:Ra,Rq,Rz(Ry),Rz(DIN),R3z,Rz(jis),Rp,Rv,Rt,Rsk,Rsm,Rc ,Rpm,RkuRdq,Roc,Mr1,Mr2,Rpk,Rvk,Rk,Rdc,A1,A2,R,Rx,AR,Rcp,Rmax,Rz-ISO etc.
Waviness:wt,wa,wp,wv,wq,wc,wku,wsk,w,wx,wz,wsm,wdc,wte,wmr,Aw,c(wmr)wmr(c),wdq etc.
Original contour Pt Pa Pp Pv Pq Pc Pku Psk Pdq/p△q Psm Pdc Pmr(c) Pz Pmr C(pmr) etc.
Main Parameters
| Item | Parameter | Resolution | |
Measurement range | X axis | 200mm | 0.1μm |
| Straightness | 0.6μm /100mm | -------- | |
| Z1(range)Sensor | 40mm(Roughness range synchronization) | 0.05μm | |
| Z Height | 550mm | colume | |
| Min. inner hole | 30mm (A smaller inner diameter can be measured by using a smaller measuring needle) | ---------- | |
| Linear accuracy | ≤±(1+I0.12HI)μm | - ------ | |
| Arc | ≤(1.2+R/8) | 2mm＜R＜10mm standard ball, The included Angle of the sampling arc:120° | |
Angle | ≤±1′ | 60°,90° angle block, The sampling length of the corner:5mm | |
| Roughness | Residual value noise | ≤0.005μm | λc:0.08mm,testing speed 0.1mm/s, measure flat crystals |
| Z1(range)Sensor | Effective range±3mm | The roughness of the curved surface can be measured | |
| Roughness measurement repeatability | 1δ≤2nm | Ra 0.35-0.5μm Square wave calibration block | |
| Indication error | ±5% | National standard | |
| Indicative stability | ≤±7% | National standard | |
| Repeatability measurement | ±3% | National standard | |
| Resolution | 0.1μm | ---------- | |
| Sensor | Type | Digital grating sensor | ----------- |
| Resolution | 0.05μm | ------- | |
| Assessment length | λc×3,4,5,6,7 | --------- | |
| Cut-off wavelength | 0.025,0.08,0.25,0.8,2.5,8mm | ---------- | |
| Climbing Ability | 77°(Upside),88°(Downside) | ------- | |
| Meas. Speed | 0.02mm to 4.0mm/s | ---------- | |
| Meas. Mode | Sensor moving | -------- | |
| XZ1Z | Three-axis electric control | It can be controlled by the software controller | |
| Power | AC 220V±10% 50Hz | ------- | |
| Environmental conditions | (RH):＜85% 20℃± 2℃,2℃/h ,RMS≤50Hz 2.5μm/s ,RMS＞50Hz 5.0μm/s | ||
Main configuration
Software interface
Equipment size
| (Product) | (Packing) | (Wt.kg) | (CBM m³) | ||||||
| Lx | Ly | Lz | Wt(kg) | Lx | Ly | Lz | Wt(kg) | ||
| 1400 | 725 | 1740 | 270 | 960 | 960 | 1950 | 50 | 300 | 0.88 |
Usage requirement
Power: AC 220V±10% 50Hz
Environment requirement:(T):10～30℃,(RH):＜85%,No obvious vibration,Independent grounding
Testing reference photos
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2007
Total Annual:
500000-1000000
Employee Number:
35~50
Ecer Certification：
Verified Supplier
HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified... HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified...
Get in touch with us
Leave a Message, we will call you back quickly!