ASTM B564 Monel Ring Forged Nickel Alloy For Extreme Operation

Product Specification

ASTM B564 Monel Ring Forged Nickel Alloy For Extreme Operation

Comprehensive Analysis of ASTM B564 Monel 400 Forged Rings

I. Material Fundamentals: Composition & Standards

▶Definition: Forged rings conforming to ASTM B564 are manufactured from Monel 400 (UNS N04400), a nickel-copper solid-solution alloy (no precipitation-hardening phases; strength enhanced via cold working).

▶Chemical Composition (per ASTM B564):

II. Core Performance: Mechanical & Corrosion Resistance
1.Mechanical Properties (Annealed Condition, ASTM B564 Specification):
▶Tensile Strength: ≥550 MPa (can exceed 800 MPa with cold working; forged rings are typically supplied annealed for machinability).
▶Yield Strength: ≥240 MPa.
▶Elongation: ≥35% (high ductility enables complex forging shapes).
2.Corrosion Resistance (Industrial Advantages):
▶Superior Scenarios: Resists seawater, hydrofluoric acid (HF, full concentration including boiling), dilute sulfuric acid, and caustic soda — ideal for marine and chemical applications.
▶Limitations: Susceptible to corrosion in strongly oxidizing environments (e.g., FeCl₃ solutions, concentrated nitric acid).
▶Temperature Range: Stable from -196℃ (cryogenic) to 538℃ (1000°F), maintaining toughness at elevated temperatures.

III. Manufacturing & Compliance
1.Forging Process:
▶Produced via open-die/closed-die forging with a minimum forging ratio of 3 (ensures densified microstructure, eliminating casting defects).
▶Post-processing: Typically annealed (relieves forging stresses and optimizes machinability).
2.ASTM B564 Mandatory Inspections:
▶Chemical Analysis: Batch-wise verification of Ni, Cu, etc., ensuring compositional compliance.
▶Non-Destructive Testing (NDT): 100% ultrasonic testing (UT) to detect internal defects.
▶Mechanical Verification: Tensile testing for strength/ductility; grain size analysis for microstructural uniformity.
3.Typical Dimensions (Industry Standard, Customizable):
▶Outer Diameter (OD): 300–1500 mm (oversized rings available via custom orders).
▶Height (Thickness): 20–200 mm.
▶Sealing Faces: Machinable to RTJ (Ring Type Joint), RF (Raised Face), or FF (Flat Face) — compatible with ASME B16.5 flange systems.

IV. Industrial Applications & Value
1.Key Sectors:
▶Marine Engineering: Seawater pipeline flanges, marine valve forgings (medium-low pressure scenarios; opt for Monel K500 for high-pressure applications).
▶Chemical Processing: HF reactor connections, acid/alkali storage tank flanges (resists dilute corrosives).
▶Energy Systems: Nuclear condenser flanges, low-sulfur oil/gas transmission pipelines.
▶General Machinery: Pump sleeves, instrument sealing rings (leveraging high ductility and corrosion resistance).
2.Competitive Benchmarking:

V. Selection Guidelines
▶Optimal Scenarios: Prioritize for medium-low pressure, seawater/weakly corrosive environments (e.g., offshore platform auxiliary piping, chemical dilute acid handling).
▶Upgrades: For high-temperature, high-pressure, or sulfur-rich corrosive conditions (e.g., Christmas tree main valves), upgrade to Monel K500 (ASTM B564-compliant, 30%+ strength improvement).
▶Cost Tradeoffs: 316L stainless steel reduces costs for mild corrosion (≤6.4 MPa) but offers 1/3 the service life of Monel 400.

Conclusion: ASTM B564 Monel 400 forged rings are a cost-effective workhorse for medium-low pressure, seawater/weak corrosive environments. For extreme strength or corrosion demands, Monel K500 (same standard) provides upgraded performance.

DINGSCO

Hunan Dinghan New Material Technology Co., Ltd. (DINGSCO) specialized in Nickel Based Corrosion Resistant and High Temperature alloys products which used in the world’s most technically demanding industries and applications.We are dedicated to providing our customers with best quality products, fastest possible deliveries, most competitive prices of Nickel Based Corrosion Resistant and High Temperature alloys in bars, rods, forged flanges, valve parts (Ball, Stem, Seat Ring, etc), forged shapes (shafts, discs, blocks, hubs, rings, cylinders and other custom shapes) according to ASTM, ASME, API, AMS, NACE and other industry standards.

PROFESSIONAL NICKEL ALLOY MANUFACTURER

• Monel, Incoloy, Inconel, Hastelloy
• VIM, ESR, Forging, Heat treatment, Machining
• Round Bar, Ball, Stem, Ring, Flange, etc
• ISO9001, API-6A, API-20B, PED, NORSOK

CORE VALUE

• QUALITY ASSURANCE
• SCIENCE AND TECHNOLOGY INNOVATION STRATEGY
• COOPERATION

CUSTOMIZED PRODUCTS:

APPLICATION: