Original Huawei ONU 4ge+2voice+WiFi Factory Direct Wholesale Gpon Router Hg8245h

HUAWEI Echolife HG8245H ONT

Specifications

Features

1. 4GE/FE+2VOICE+WIFI+USB (external antenna)
2. Plug-and-ptay: services can be deployed by one click on the NMS, and on-site configuration is not required.
3. Remote diagnosis: Remote Jault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dial-up emulation tniriated by the NMS
4. Link monitoring: E2E link detection is achieved using 802.log Ethernet OAM
5. High speed forwarding: 900 Mbit/s /bruxiniing in the NAT scenario
6. IPv6 Capability: support IPd6/1Pv4 dual stacfe and DS-Lite

 

Question and Answer
 

Q: What is the difference between Huawei HG8245H and Huawei HG8245A?
A: Please refer to below:

Q: What is the difference between Huawei HG8245H and Huawei HG8240/HG8240F?
A: The main difference is Huawei HG8245H comes with WiFi, Huawei HG8240/HG8240F not. Huawei HG8245H comes with 4GE ports, Huawei HG8240/HG8240F with 4FE ports.

Q: Do I need to have 2 cable for Huawei HG8245H, one in one out?
A: No, one cable is enough, the GPON is using WDM technology, which only require one cable.

Q: Can I use Huawei HG8245H with other brand OLT?
A: Not suggest, as the understanding between different vendor on TR069/OMCI may different.

Q: Does Huawei HG8245H support routing function?
A: Yes.

Q: Does Huawei HG8245H support battery back?
A: No.

Q: How to Restore Factory Settings for Huawei HG8245H?
A: Use either of the following methods to restore factory settings for Huawei HG8245H:
1. Choose System Tools > Restore Default Configuration from the main menu on the web page and click Restore Default Configuration.
2. Hold down the RESET button for a long period of time (longer than 10s) to restart the Huawei HG8245H with factory settings.

Q: How to configure the Wi-Fi service on Huawei HG8245H?
A: Configure the Wi-Fi service through web pages or TR069 servers for Huawei HG8245H that supports Wi-Fi. For details, see the user manual of Huawei HG8245H device.

Q: What is ONT's optical power range?
A: For the Huawei HG8245H using GPON upstream transmission: -27 dBm to -8 dBm (Class B+); -30 dBm to -8dBm (Class C+).

Q: Can Huawei HG8245H connect to a switch in the lower layer to support the enterprise private line service?
A: No. Huawei HG8245H cannot connect to a PON terminal, switch, or router in the lower layer.

Q: Can an optical port on Huawei HG8245H connect to an optical port on an optical transceiver?
A: No. The optical port on Huawei HG8245H is a PON port while the optical port on an optical transceiver is a GE port.

Q: How to change a digitmap mapping mode of Huawei HG8245H?
A: Choose Voice > VoIP Basic Configuration from the main menu on the web page and configure Digitmap Match Mode.

Q: Which ONTs support dual-band Wi-Fi?
A: The ONTs with a name ended with "D" or "Q" support dual-band Wi-Fi, such as the HG8245D and HG8245Q.
XG-PON gateway type ONTs support dual-band Wi-Fi, such as the HN8055Q and HN8245Q.

Q: Can I use an iPad to log in to the Huawei HG8245H web page to upgrade the firmware version, or update and download the Huawei HG8245H configuration file?
A: An iPad cannot be used to perform a firmware upgrade, or update or download the Huawei HG8245H configuration file.
 

Mounting an ONT onto the wall

1. Mark two positions with the same spacing as that between the two mounting holes of the ONT using a marker on a wall.
2. Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the holes and install two expansion bolts.
3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws