Shanghai Hengxiang Optical Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 100K pieces per year |
| Delivery Time | 3-5 working days for sample order, 7-15 working days for mass order |
| Packaging Details | each 1 piece was packed into single carton box |
| Type | Rotary encoder |
| Resolution | up to 1600ppr |
| Output | N |
| Cable length | 150mm (ribbon cable) |
| Protection level | IP50 |
| Output phase | A, B, Z |
| Top response frequency | 100kHZ |
| Brand Name | Hengxiang |
| Model Number | S18 |
| Certification | CE,ISO9001 |
| Place of Origin | Shanghai,China |
View Detail Information
Explore similar products
Incremental Shaft Optical Rotary Encoders K22 For 24V Servo Motor 6.35mm Blind
13mm Shaft Length Incremental Optical Encoder Thickness 28mm Line Driver7272
Blind Hole 8mm K38 Rotary Shaft Encoder AB Phase NPN Output Dc 10 - 30vV rotayr
K38 Mechanical Rotary Encoder 20-16384 Revolution Precision Rotary Encoder ovw2
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 100K pieces per year |
| Delivery Time | 3-5 working days for sample order, 7-15 working days for mass order | Packaging Details | each 1 piece was packed into single carton box |
| Type | Rotary encoder | Resolution | up to 1600ppr |
| Output | N | Cable length | 150mm (ribbon cable) |
| Protection level | IP50 | Output phase | A, B, Z |
| Top response frequency | 100kHZ | Brand Name | Hengxiang |
| Model Number | S18 | Certification | CE,ISO9001 |
| Place of Origin | Shanghai,China | ||
| High Light | 1600 ppr Optical Rotary Encoders ，DC24V Optical Rotary Encoders ，1600 ppr optical shaft encoders | ||
Best price Incremental Optical Rotary Encoder S18 DC5-24V up to 1600ppr
Prodution Paramenters
| Brand | HENGXIANG |
| External dimensions | External diameter: 18mm |
| Thickness: 18mm | |
| Solid Shaft Diameter: ⌀2.5mm | |
| Resolution | 36;50;60;100;200;250;256;300;360;400;500;512;720;800;1000;1024；1440;1600 |
| Output phase | Phase A,B,Z |
| Supply voltage | DC5V ; DC8-30V |
| Outlettype | Cable out from side |
| Cable out from back | |
| Output mode | Collector open circuit output(NPN &PNP) |
| Environmental temperature | Operating temperature: -20~+80° (Non icing) |
| Storage temperature: -25~+85° (Non icing) | |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Top Resonse Frequency | 100kHz Max |
| Top Rev | 5000rpm |
| Protection grade | IP50 |
| Consumption current | 50mA Max |
| Rise/ Fall time | 100nsec Max |
| Shaft Load | Radial: 2N; Axial:2N |
| Vibration(endure) | Amplitude 0.75mm,10-50Hz,1 hour for X/Y/Z direction individually |
| Shock(endure) | 49/m/s2,three times for X,Y,Z direction individually |
| Shaft Material | 304 stainless steel |
| Cable length | 150mm |
| Shell | Aluminium Alloy |
| Package | Carton box |
| Net weight | About 20g (with package) |
| Certification | CE |
Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.
Company Details
Business Type:
Manufacturer
Year Established:
2001
Total Annual:
1000000-5000000
Ecer Certification：
Site Member
Shanghai Hengxiang Optical Electronics Co., Ltd. is a high-tech enterprise, specializing in the creation, research, production, and marketing of high-precision optical encoders. We have a mature independent research and development capability, which enables to customize the production of exclusiv... Shanghai Hengxiang Optical Electronics Co., Ltd. is a high-tech enterprise, specializing in the creation, research, production, and marketing of high-precision optical encoders. We have a mature independent research and development capability, which enables to customize the production of exclusiv...
Get in touch with us
Leave a Message, we will call you back quickly!