ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1500 |
| Delivery Time | 5 to 8 working days |
| Packaging Details | Pouching |
| Encapsulation / Housing | DIP |
| Characteristics | 1kpa-700kpa |
| Minimum packaging quantity | 30 |
| Application fields | Measurement instruments |
| Range | 0-1kpa |
| Temperature compensation | 0 - 70℃ |
| Brand Name | YJJ |
| Model Number | HPSAC3000 010M-D-S |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
YJJ XGZP182 Pressure Sensor Has an Absolute Pressure Range Of 700 Kpa To 100 Psi
FSS1500NST FSS1500NGT Force Sensors And Load Cells Power supply 3.3V～12.5V for
26PCCFA6D 26PCCFA6G Pressure Sensor For Filter Monitoring Equipment Robotics
Waterproof YJJ XGZP183 Pressure Sensor for Liquid Level Oil Pressure and
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1500 |
| Delivery Time | 5 to 8 working days | Packaging Details | Pouching |
| Encapsulation / Housing | DIP | Characteristics | 1kpa-700kpa |
| Minimum packaging quantity | 30 | Application fields | Measurement instruments |
| Range | 0-1kpa | Temperature compensation | 0 - 70℃ |
| Brand Name | YJJ | Model Number | HPSAC3000 010M-D-S |
| Place of Origin | CHINA | ||
| High Light | dual-tube HVAC pressure sensor ，1Kpa constant current sensor ，electronic pressure sensor for HVAC | ||
Product Description:
YJJ HPSAC3000 010M-D-S Dual-Tube 1Kpa Constant Current Pressure Sensor Is Used In HVAC Systems
Features:
High performance and high precision enable this sensor to be used in many applications, and its compact and convenient design is highly suitable for production users.
The HPSAC 3000 pressure sensor is installed on a 1mm thick ceramic substrate, with one or two pressure tubes. Printed on the substrate are
Thick film resistors are individually laser-processed to provide temperature compensation and zero-point calibration. An additional resistor is trimmed based on individual...
The range of the sensor is designed to provide convenient sensor amplification and external differential amplifier. The compatible pressure medium for this sensor series
For drying air or non-corrosive gases and liquids.
The HPSAC 3000 model is designed for constant current excitation. The pressure range of the entire series is from 1 kPa to 700 kPa.
Features
Constant current excitation
Easy-to-use DIP packaging
Wide compensation range (0 to 70°C)
Zero calibration
High-performance OEM application
Reducer, measuring tools and relative configuration
Pressure range from 10 mBar to 7 Bar (1 kPa - 700 kPa) Application
Medical instrumentation
Respirators
HVAC (Heating, Ventilation, and Air Conditioning) Process control
Leakage detection Pneumatic control
Height gauge
Specification Description
1) Overpressure refers to a greater force that is applied without damaging the sensing element.
2) The blasting pressure is the greater pressure applied without causing leakage or damage to the sensing element.
3) The analog output signal is proportional to the input current.
4) The offset voltage is the voltage output at zero pressure.
5) The range is the algebraic difference between the full-scale pressure range and the offset.
6) The range and offset thermal errors indicate the significant deviation of the sensor signal (range and offset) throughout the compensation process, compared to the value at 25°C.
In comparison, the temperature range is from 0 to 70°C. For the pressure range where p ≤ 100 mbar, this parameter is defined as Zmax = 0.5 mV.
7) Repetitiveness is defined as the typical deviation of the output signal after 10 pressure cycles.
8) Nonlinearity is defined as the BFSL (better fitting straight line) throughout the entire pressure range, measured on the upper side of the mold at P1.
9) Compatibility of the medium: At the pressure port P1: Clean, dry and non-corrosive gas, suitable for silicon, Pyrex, RTV, gold,
Ceramic Al2O3, epoxy resin, tin.
10) Compatibility with media: At the pressure port P2: Non-corrosive gases are present for silicon, Pyrex, RTV, ceramic Al2O3, epoxy resin, and tin.
Or liquid
Specifications:
| Work stress | 1kpa |
| Output Type | Pressure |
| Output voltage | 5V |
| Precision | 1% |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!