Ningbo Anyo Import & Export Co., Ltd.
| Supply Ability | 30000 per day |
| Packaging Details | 2000pcs/carton, 16kg, 39*31*25cm |
| Delivery Time | 8-10 work days |
| Payment Terms | L/C, T/T |
| Other name | Carbon potentiometer |
| Total resistance | 100Ω ~ 2.2MΩ |
| Resistance taper | B |
| Rotary life | 10000 cycles |
| Power rating | 0.2W |
| Resistance tolerance | ± 20% |
| Brand Name | ANYO |
| Model Number | PC1601-V-B-P18 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Random Color Plastic Control Knobs ABS / Brass Material For Rotary Potentiometer
10A Dimmer Carbon Composition Potentiometer With Push Switch For Lighting
Kitchen Plastic Control Knobs / Ventilator Control Knob For 6mm Shaft
Adjustable 3mm Cermet Trimming Potentiometer SMD 3303 Single Turn 50V
Product Specification
| Supply Ability | 30000 per day | Packaging Details | 2000pcs/carton, 16kg, 39*31*25cm |
| Delivery Time | 8-10 work days | Payment Terms | L/C, T/T |
| Other name | Carbon potentiometer | Total resistance | 100Ω ~ 2.2MΩ |
| Resistance taper | B | Rotary life | 10000 cycles |
| Power rating | 0.2W | Resistance tolerance | ± 20% |
| Brand Name | ANYO | Model Number | PC1601-V-B-P18 |
| Place of Origin | CHINA | ||
| High Light | rotary switch potentiometer ，carbon type potentiometer | ||
Rotary preset carbon semi-fixed ceramic potentiometer PC1601-V-B-P18
Description:
A potentiometer is also commonly known as a potmeter or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
Working principle:
Rorary potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor.
Mechanical specifications:
| Total rotation angel | The angle is measured by rotating shaft from the end of terminal R1 to the end of terminal R3. | 300°±5° |
| Rotation torque | Rotational torque when turn the shaft :without special provision,rotational speed is 60°/s in ambient temperature 5-35℃ | 0.3-1.5Ncm |
| Stop torque | The force that shaft transfer from terminal 1 to stop point or terminal 3 to stop point after 10 seconds until be break | >40Ncm |
Electrical specifications:
| Total resistance | Measurement shall be made by the resistance between terminal R1and R3. | 1KΩ |
| Resistance taper | Resistance changes | B |
| Total Resistance tolerance | Measurement shall be made by the resistance tolerance between terminal R1 and R3. | ± 20% |
| Rated power | Rated power is based on continuous full load operation at the maximum voltage between terminal R1 and R3. | 0.2W(50 ℃) |
| Residual resistance | Test residual resistance beteen terminal R1 and R2; terminal R2 and R3 | ≤0.1%R |
| Rotation of noise | The murmur will appear when shaft turn from terminal 1 to terminal 3 by 30 rounds/minute equably speed. | ≤47mV |
| Electrical rotation angle | Resistance effective changes in perspective | 280°±20° |
| Max operating voltage | Maximal voltage which sustained by terminal R1 and R3 | 50VDC |
Others:
| Rotation life | After 25,000 rotation after the test, the changes impacted no more than ± (15% R +0.5 Ω) rotational noise of not more than 100 mv |
| Terminal strength | After welding (350℃, 3,5 seconds) after the of terminal contacts should be good, no termination loosening of |
| Soldering ability | Dip the terminals into tin tank at 260°C±5°C for 2±0.5 seconds, the soldering area should be more than 90%. |
Resistance SR code table:
| Resistance | Code |
| 100Ω | 101 |
| 500Ω | 501 |
| 1KΩ | 102 |
| 2KΩ | 202 |
| 3.3KΩ | 332 |
| 4.7KΩ | 472 |
| 5KΩ | 502 |
| 10KΩ | 103 |
| 20KΩ | 203 |
| 22KΩ | 223 |
| 47KΩ | 473 |
| 50KΩ | 503 |
| 100KΩ | 104 |
| 200KΩ | 204 |
| 250KΩ | 254 |
| 500KΩ | 504 |
| 1MΩ | 105 |
| 2MΩ | 205 |
| 2.2MΩ | 225 |
Dimension:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2012
Total Annual:
1000000-2000000
Employee Number:
100~120
Ecer Certification：
Site Member
ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery tim... ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery tim...
Get in touch with us
Leave a Message, we will call you back quickly!