Product Specification

GE Mac1200ST ECG Machine Printer Assembly

Quick Detail:

Printing components of electrocardiograph, including machine cover, cutter, thermal sensor, casing, thermal paper roll, anti-side roll 1, motor, thermal printing device, anti-side roll 2, frame, shaft side mechanism, work indicator light , chute and control panel mechanism, the cover is connected to the rear edge of the housing through a circlip. With the cutting knife of this utility model, the blade is installed in the chute through the slider. By pulling the pull ring to drive the blade to move, the ECG drawing can be accurately cut, which avoids the inability to correct the ECG drawing due to uneven tearing by hand or the ECG being torn. The problem of accurately judging the condition of the disease. The setting of the thermostat is conducive to constant temperature control of the thermal printer core to avoid the problem of lines that are too thick due to excessive temperature or too thin due to low temperature. Anti-side roll one and anti-side roll two The setting effectively prevents the thermal paper from rolling on its side when printing out. An electrocardiograph is a common medical instrument used to detect and record patients' electrocardiogram signals. Correctly installing the printing paper is an important step in using the electrocardiograph.

It is characterized in that one side of the base frame is provided with a chute with an upward opening, one end of the wrench is rotatably arranged with one side of the base frame, and the other end is a free end. A slot is formed on the inside of the wrench, and the slot has a third locking position and a second locking position. The sliding portion extends laterally from one side of the printhead bracket. The sliding part is located in the chute, and the outer end is stuck in the groove. The patented technology of the present invention also discloses a thermal printing core. When loading printing paper or correcting processing, just pull the wrench slightly, and the print head bracket will open with the rubber roller. After processing is completed, the wrench will return to its original shape and the print head bracket will be close to the rubber roller. The overall structure is simple and the operation is convenient and quick.

► Working principle

一. Before starting to assemble the ECG printing paper, you need to complete the following preparations:

1. Confirm the specifications and sizes of the required printing paper, and prepare the corresponding type and length of printing paper;
2. Find the printing paper compartment of the ECG machine, which is usually located at the bottom or rear of the machine;
3. Make sure you understand and master the instruction manual of the electrocardiograph to better understand the assembly steps.

二. Open the printing paper compartment
1. First, confirm that the electrocardiograph is turned off and not connected to the power source;
2. Find the opening of the printing paper bin, which is usually a cover that can be pushed or flipped open;
3. Carefully observe the instructions on the warehouse door to make sure you understand the correct way to open it;
4. Follow the instructions on the label, gently push or open the cover, and open the printing paper compartment.

三. Install printing paper
1. Take out a roll of printing paper and make sure the printing side is facing down;
2. Pay attention to the arrow mark on the printing paper to ensure that the paper is in the correct direction when installing;
3. Place the printing paper flatly in the printing paper bin, and align one end of the paper with the starting position of the bin;
4. Depending on the actual structure of the electrocardiograph, some models will have a set of slots or buckles. You can insert the printing paper into these positions to ensure that the paper is firmly fixed in the chamber;
5. Make sure that the printing paper is fully unfolded without wrinkles or overlaps to ensure the quality of the paper and the output effect.

四. Close the printing paper compartment door
1. Follow the instructions in the user manual to ensure that the printing paper is installed correctly, and then gently close the printing paper compartment;
2. Be careful not to use too much force to avoid damaging the printing paper or the machine.
5. Check the status of printing paper
1. Confirm that the printing paper has been firmly installed in the electrocardiograph;
2. Carefully check whether the printing paper is flat, unfolded, and has no wrinkles or creases;
3. If you find that the printing paper is loose or irregular, correct it and reinstall it in time.
Correctly assembling the ECG paper is an important step in using the ECG machine. Through the methods and steps provided in this article, I believe you have understood the assembly method of Libon Electronic Printing Paper and can operate it skillfully.

 features:

About delivery:

We default to express delivery by DHL. We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.

About ordering

If you have any questions about the GE Mac1200ST electrocardiograph printer assembly , please call or email us .