China World Technology Medical Equipment Service Group
| Payment Terms | T/T(wire transfer), Western Union, Paypal |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | P/N LI13I001A Mindray IMEC5 IMEC8 IMEC10 IMEC12 Patient Monitor Battery New Original |
| Brand | Mindray |
| Part No. | LI13I001A |
| Battery Technology | Lithium-ions |
| Suitable for | Mindray iMEC Mindray iPM |
| Voltage | 11.1V |
| Capacity | 5200 mhA |
| Condition | Original new |
| Warranty | 90 days |
| Brand Name | Mindray |
| Model Number | LI13I001A |
View Detail Information
Explore similar products
Mindray ECG Leadwires EL6802A 12-Lead Limb Cable IEC Clip PN0010-30-42903 For
TS-W-D Patient Monitor Accessories GE Ohmeda TruSignal 9 Pin Spo2 Wrap Sensor
GE Rechargeable Li-Ion Battery Pack M4S2P14453-GER9 5.36Ah 14.4V 77.18Wh New
CBL 3 Lead ECG Safety Patient Trunk Cable IEC PN M1510A Ref 989803103871 for
Product Specification
| Payment Terms | T/T(wire transfer), Western Union, Paypal | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | P/N LI13I001A Mindray IMEC5 IMEC8 IMEC10 IMEC12 Patient Monitor Battery New Original |
| Brand | Mindray | Part No. | LI13I001A |
| Battery Technology | Lithium-ions | Suitable for | Mindray iMEC Mindray iPM |
| Voltage | 11.1V | Capacity | 5200 mhA |
| Condition | Original new | Warranty | 90 days |
| Brand Name | Mindray | Model Number | LI13I001A |
| High Light | LI13I001A Patient Monitor Battery ，Mindray IMEC5 Patient Monitor Battery ，IMEC12 Patient Monitor Battery | ||
P/N LI13I001A Mindray IMEC5 IMEC8 IMEC10 IMEC12 Patient Monitor Battery New Original
Replacing a Battery
If the patient monitor is running on battery power, ensure that the patient monitor is turned off before changing the battery. To replace the battery, follow these steps:
1. Open the battery cover.
2. Open the latch that secures the battery to be replaced and remove the battery.
3. Insert the battery into the slot with the contacts facing in.
4. Close the battery cover.
Description
| Capacity | 5200 mhA |
| Voltage | 11.1V |
| Suitable for | Mindray iMEC Mindray iPM
|
| Part No . | LI13I001A |
| Battery Technology | Lithium-ions |
Condition the battery
Batteries must be conditioned before first use. The battery conditioning cycle is a continuous charge of the battery, followed by a continuous discharge and recharge of the battery. Batteries must be conditioned regularly to maintain their useful life.
To charge the battery, proceed as follows:
1. Disconnect the monitor from the patient and stop any observation or measurement.
2. Insert the battery to be conditioned into the battery compartment of the monitor.
3. Connect the AC / DC adapter to the monitor and let the battery charge continuously for 10 hours.
4. Disconnect the AC / DC power adapter and leave the monitor powered on by the battery until it turns off.
5. Reconnect the monitor to AC / DC power and let the battery charge continuously for 10 hours.
Check the battery
A battery performance test should be performed every two years before repairing the monitor or if the battery is suspected to be the cause of the problem. Rechargeable batteries can deteriorate over time. To check battery performance
please follow the instructions below:
1. Disconnect the monitor from the patient and stop any observation or measurement.
2. Connect the AC / DC power supply to the monitor and let the battery charge continuously for 10 hours.
3. Disconnect the AC / DC power adapter and leave the monitor powered on by the battery until it turns off.
4. Battery life directly reflects its performance.
If the battery life is significantly shorter than specified, replace the battery or contact support.
Notes
1. If the battery is fully charged and runs for too short a period of time, it may be damaged or malfunction. The operating time depends on the configuration and operation. For example, more frequent NIBP measurements also reduce operating times.
2. The battery should be replaced if it shows any visible signs of damage or if it no longer charges. Remove the old batteries from the monitor and recycle them.
If you're interested in P/N LI13I001A Mindray IMEC5 IMEC8 IMEC10 IMEC12 Patient Monitor Battery New Original,feel free to contact us .Thank you .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!