China World Technology Medical Equipment Service Group
| Payment Terms | Full before shipment |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | PHiliph VM8 Patient Monitor Spare Part Co2 Module 463664015441 |
| Brand | PHiliph |
| Part No | 463664015441 |
| Use for | PHiliph VM8 Patient Monitor |
| Condition | New & Used |
| Warranty | 90 days |
| MOQ | One piece |
| Packaging | One piece |
| Delivery Method | DHL,UPS ,Fedex |
| Payment Method | T/T ,Paypal , western union |
| Brand Name | PHiliph |
| Model Number | 463664015441 |
View Detail Information
Explore similar products
Patient Monitor Accessories Goldway UT4000 Monitor Blood Pressure Plate Great
Mindray PM7000 Patient Monitor Accessories Keyboard Silicone 7000-20-24395
Well-chosen Patient Monitor Mainboard Goldway G30 40 60 70 80 UT4000B UT6000
Patient Monitor Repair Parts GE Dash4000 Patient Monitor Flat Cable in ready
Product Specification
| Payment Terms | Full before shipment | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | PHiliph VM8 Patient Monitor Spare Part Co2 Module 463664015441 |
| Brand | PHiliph | Part No | 463664015441 |
| Use for | PHiliph VM8 Patient Monitor | Condition | New & Used |
| Warranty | 90 days | MOQ | One piece |
| Packaging | One piece | Delivery Method | DHL,UPS ,Fedex |
| Payment Method | T/T ,Paypal , western union | Brand Name | PHiliph |
| Model Number | 463664015441 | ||
| High Light | PHiliph VM8 Patient Monitor Spare Parts ，463664015441 Patient Monitor Spare Parts ，Patient Monitor Co2 Module | ||
463664015441 PHiliphh VM8 Patient Monitor Spare Part Co2 Module
Calibrating the CO2 Module
Important - Since the display uses the current date and time as the calibration date/time, ensure that the system date and time are set correctly.
NOTE - The monitor always shows CO2 module operating time (operating time) in CO2 test window.
1. Connect the other end of the FilterLine hose (if not already connected) to the monitor's CO2 input; leave the other end unconnected.
2. In the CO2 test window, highlight the scroll wheel Start calibration and press the scroll wheel. A confirmation window will appear prompting you to connect the gas to the CO2 module.
3. Connect the other end of the FilterLine hose to the inlet of the 5% gas concentration gas regulator.
4. Open the gas control valve to allow 5% CO2 gas to flow through the monitor.
5. In the confirmation window, turn the dial to the Yes position and press the dial to start the calibration.
The display will start calibrating the CO2 module and display the calibration value when it is complete.
NOTE—The calibration process can take up to a minute.
6. Turn off the airflow and turn the wheel to return to the CO2 test window. End the test by pressing the selector.
7. If the calibration is successful, the date and time of the last calibration will be reset in the CO2 test window. Check this by opening the CO2 test window again.
8. If the module cannot be calibrated, an error message will appear. CO2 module replacement
Specification of PHiliphh VM8 Co2 module 463664015441 .
| Product Name | PHiliphh VM8 Co2 module 463664015441 |
| Brand | PHiliphh |
| Part No | 463664015441 |
| Use for | PHiliphh VM8 patient monitor |
| Condition | Used & New |
| Stock | Sufficient |
Removing the SureSigns VM8 CO2 Module
To remove the CO2 module:
1. Disconnect the power cord behind the monitor.
2. Remove the battery from the display.
3. Remove the four Torx T10 screws and washers (3 on the bottom and one on the top) from the CO2 module cover.
4. Remove the CO2 module from the rear of the monitor housing. And disconnect the CO2 wire that connects to the CO2 board connector.
FAQ:
Our MOQ is one piece .Welcome to take samples to test our quality .
Usually it will take around 2-3 working days to prepare for the order after payment and you will receive it around 5-7 working days .
As our stock is changing ,right now we don’t have products list .If you would like to know what we have ,feel free to check our website ,and send us pictures to check price
Sure .Video can be sent as well before the shipment .
If you're interested in 463664015441 PHiliphh VM8 Patient Monitor Spare Part Co2 Module ,feel free to contact us .Thank you .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!