China World Technology Medical Equipment Service Group
| Payment Terms | T/T(wire transfer), Western Union, Paypal |
| Delivery Time | 3-5 working days |
| Packaging Details | Carton |
| Product Name | Part No 6850645 Dräger Evita 4 Ventilator Oxygen Sensor |
| Brand | Drager |
| Part No . | 6850645 |
| Measuring range | 0 to 100 % by vol. oxygen |
| Response time T10-90 | 16 sec |
| Operating temperature | 15 to 40 °C |
| Storage temperature | -20 to 40 °C |
| Dimensions | Ø 28 mm, height 22 mm |
| Warranty | 90 days |
| MOQ | one piece |
| Condition | New and original |
| Brand Name | Dräger |
| Model Number | 6850645 |
View Detail Information
Explore similar products
Mindray ECG Leadwires EL6802A 12-Lead Limb Cable IEC Clip PN0010-30-42903 For
TS-W-D Patient Monitor Accessories GE Ohmeda TruSignal 9 Pin Spo2 Wrap Sensor
CBL 3 Lead ECG Safety Patient Trunk Cable IEC PN M1510A Ref 989803103871 for
M1024254 GE Pediatric Reusable Temperature Probes 400 Series Skin Probe 3m 10ft
Product Specification
| Payment Terms | T/T(wire transfer), Western Union, Paypal | Delivery Time | 3-5 working days |
| Packaging Details | Carton | Product Name | Part No 6850645 Dräger Evita 4 Ventilator Oxygen Sensor |
| Brand | Drager | Part No . | 6850645 |
| Measuring range | 0 to 100 % by vol. oxygen | Response time T10-90 | 16 sec |
| Operating temperature | 15 to 40 °C | Storage temperature | -20 to 40 °C |
| Dimensions | Ø 28 mm, height 22 mm | Warranty | 90 days |
| MOQ | one piece | Condition | New and original |
| Brand Name | Dräger | Model Number | 6850645 |
| High Light | 6850645 Patient Monitor Accessories ，Ventilator Oxygen Sensor Patient Monitor Accessories ，Height 22mm Ventilator Oxygen Sensor | ||
Part No 6850645 DräGer Evita 4 Ventilator Oxygen Sensor Original New
Part No 6850645 Dräger Evita 4 Ventilator Oxygen Sensor
About O2 sensor 68 50 645
Introduced in 1977, the O2 sensor capsule is used to measure and monitor inhaled O2 concentrations in anesthesia and intensive care equipment. Since then, more than 1.6 million* sensors have been manufactured and shipped worldwide. This sensor is used in devices such as Fabius series, Evita series, Incubator 8000, Cicero A/B and Oxydig. O2 sensor capsules have a lifespan of more than 12 months
Fast O2 sensors 68 50 930
Fast O2 sensors were introduced to the market in 1994 as a method of measuring and monitoring inspiratory and expiratory O2 concentrations with respiratory resolution. Since then, more than 470,000 sensors have been shipped worldwide. This sensor is used in devices such as Primus, Julian, Cicero EM, Cato, PM8060, PM8050, etc. The fast O2 sensor has a lifespan of more than 6 months.
The Dräger O2 sensor is an electrochemical system for measuring the partial pressure of O2. The sensor works on the principle of galvanic cells. The gas mixture to be monitored diffuses through the plastic membrane into the sensor electrolyte. The electrolyte consists of a working electrode (gold electrode) and a counter electrode (lead electrode). The oxygen to be monitored is electrochemically reduced at the working electrode.
O2 + 2H2O + 4e- → 4OH: while the counter electrode is oxidized:
2Pb → 2Pb2 + + 4eA generates a current that is proportional to the partial pressure of O2 in the mixed gas to be monitored.
Benefits
- 100% system compatibility with Dräger devices and systems
- High measurement accuracy with above-average quality standards and extensive testing
-Compliance with national and international requirements
| O2 sensor capsule (68 50 645) | Fast O2 sensor (68 50 930) | |
| Measuring range: | 0 to 100 % by vol. oxygen | 0 to 100 % by vol. oxygen |
| Response time T10-90 | 16 sec | 0.5 sec. |
| Operating temperature: | 15 to 40 °C | 15 to 40 °C |
| Storage temperature: | -20 to 40 °C | -20 to 40 °C |
| Dimensions | Ø 28 mm, height 22 mm | Ø 11 mm, height 13 mm |
Calibrating
The last calibration/zero value is stored until the next calibration/zero, even if the machine is turned off. The pressure sensor used to measure airway pressure is calibrated automatically. The flow and O2 sensors are calibrated automatically every day.
The flow sensor can be calibrated manually at any time, even during ventilation
The O2 sensor can be calibrated manually at any time, even during ventilation. The applied O2 concentration is not affected by calibration. CO2 sensor calibration can be checked during ventilation
O2 . sensor calibration
- Before operation, during equipment inspection.
- After replacing the O2 sensor (allow 15 minutes for the O2 heating time if the deviation between the measured value and the set value exceeds 2% by volume).
The O2 sensor can be calibrated during ventilation.
Start calibration: Press the button »Calibrate«. Screen (example):
Press the key »O2«.
»LED« display button changes color to yellow.
Message in the instructions at the bottom of the screen: O2 calibration After calibration is complete, the yellow »LED« on the display button goes out.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!