Innomed Cardio-Aid 200-B Defibrillator Board INNOMD MEDICAL DEFI BOARD R-1782-2

Product Specification

Innomed Cardio-Aid 200-B Defibrillator Board INNOMD MEDICAL DEFI BOARD R-1782-2 Used in Good

►Brief Introduction

Board INNOMD MEDICAL DEFI BOARD R-1782-2 is the core component of the Innomed Cardio-Aid 200-B Defibrillator. The board uses high-quality components and strict production processes to ensure that the circuit board operates stably in emergency situations and provides continuous and reliable defibrillation energy output. The precision circuit design ensures the accurate transmission and energy control of defibrillation waveforms (such as biphasic waves), improves the success rate of rescue, and has built-in multiple safety protection mechanisms. The design and manufacturing follow the medical device industry standards and meet the core requirements of safety and effectiveness. systems.

►Specification

►How to install the board

1. Remove the outer shell:

Use the correct tools to remove the outer shell of the device and any necessary internal bezels or brackets to safely access the motherboard.

2. Disconnect:

Carefully record the location and orientation of all cables and connectors connected to the old motherboard (taking photos is very helpful).

Disconnect these connections one by one. Pay special attention to high-voltage cables, battery cables, display cables, keypad cables, ECG lead wire connectors, etc. Some connectors may have locks.

3. Remove the old motherboard:

Remove the screws or clips that secure the motherboard.

Carefully remove the old motherboard from the device rack or base.

4. Install the new motherboard:

Carefully align the new motherboard with the installation position.

Fix all screws or clips to ensure that the motherboard is firmly installed.

5. Reconnect:

Use your previous records (photos/notes) to accurately plug all cables and connectors back into the corresponding interfaces on the new motherboard, ensuring that the orientation and position are exactly correct. A wrong connection can cause device failure or damage.

►Warning
1. High Voltage Hazard: The defibrillator contains high voltage capacitors that can store lethal voltage even after power is removed. Non-professional contact may result in severe electric shock or even death.

2. Equipment Damage: Improper installation may cause permanent damage to the device, affecting its life-saving function in an emergency.

3. Warranty Void: Unauthorized repairs or parts replacements will usually void the device warranty.

4. Regulatory Requirements: Repair and calibration of medical equipment are usually subject to laws, regulations and industry standards and must be performed by qualified personnel.

5. Safety Risks: Improper installation may cause the device to not work properly or give erroneous readings at critical moments, endangering the patient's life.

If you have any questions about Innomed Cardio-Aid 200-B Defibrillator Board INNOMD MEDICAL DEFI BOARD R-1782-2 Used in Good , please comtact me freely. Wish you have a good life.