Nihon Kohden BSM-2301C Patient Monitor Repair For Hospital ICU Clinic Medical

Product Specification

Nihon Kohden BSM-2301C Patient Monitor Used Repair for Hospital ICU Clinic Medical Equipment

► Brief Description

General information on maintenance

The external surfaces of the instrument (e.g. operation buttons) may be contaminated by infectious bacteria, so disinfect and clean them before maintaining the instrument.

When maintaining instruments, wear rubber gloves to protect yourself from infection.

• If a lithium battery is damaged, the solvent inside the lithium battery may leak or toxic substances may leak out. If solvents or toxic substances come into contact with your skin or get into your eyes or mouth, immediately rinse them with plenty of water and seek medical attention.

Liquid ingress
The instrument is not drip-proof, so do not place it in places where water or liquids may enter or drip onto the instrument. If liquid accidentally enters the instrument or liquid accidentally drips from the instrument, disassemble the instrument, clean it with clean water, and dry it completely. After assembly, make sure there are no problems during patient safety check and function/performance check.
If a problem occurs with the instrument, please contact your Nihon Kohden representative for repair.
Environmental Precautions
Depending on local laws in your community, it may be illegal to dispose of lithium batteries and CRT devices in regular trash cans. Please check with local authorities for proper disposal procedures.

► Specifications

► Detailed Photos

► Transportation

• When transporting the instrument, use the shipping containers and packing materials provided for the instrument. Double-pack the instrument if necessary.
In addition, after packing the instrument, place it in a shipping container to prevent cushioning material from entering the instrument's interior.
• When transporting the instrument's boards or units, always use conductive bags. When transporting power strips, power adapters, or boards containing lithium batteries, never use aluminum bags. In addition, never wrap the instrument's boards or units in styrene foam or plastic bags, which can generate static electricity.

Handling Instruments

• Since the instrument's outer surface is made of resin, the instrument's outer surface is easily damaged. Therefore, when handling the instrument, please remove any debris from around the instrument and be careful not to damage or contaminate the instrument.
• Since most circuit boards in instruments are multilayer boards with surface-mounted electrical components (SMDs), special tools are required to remove and solder electrical components. To avoid damaging other electrical components, do not disassemble and solder SMD components yourself.
Measurement and test equipment
Inspect and calibrate measurement and test equipment according to inspection and calibration procedures to maintain its accuracy.

Thank you for your time. If you are interested in our company or our Nihon Kohden BSM-2301C Patient Monitor Used Repair for Hospital ICU Clinic Medical Equipment, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours. Wish you a happy life.