500-1000kg/H PTO Pellet Mill 10-80hp Biomass Sawdust Pellet Making Machine With

500-1000kg/h 10-80hp PTO pellet Mill biomass sawdust pellet making mill with CE certificate

Product Description:

In addition to processing wood chips, the flat die sawdust pellet machine can also use crop waste such as corn stalks, straw, peanut shells, corn cobs, cotton stalks, weeds, branches, leaves, sawdust, bark, etc. as raw materials. The formed pellets are a new type of bioenergy, which can replace firewood, raw coal, fuel oil, liquefied petroleum gas, etc., and are widely used in heating, domestic stoves, industrial boilers, biomass power plants, etc.

The equipment is based on the inherent motion of the machine. The motor (or diesel engine) is used as the power to drive the gear to the main shaft. The powdery material is plasticized, the protein is denatured by temperature, and extruded from the die hole under the extrusion of the pressure roller. The required particle length can be obtained by adjusting the cutter, and then the formed particles are passed through the throwing tray. It is sent out of the machine through the discharge port.

After the mold is worn out, only the sub-mold needs to be replaced, and the sub-mold plate can be used on both sides, which improves the utilization rate of the mold and greatly reduces the cost; it can also customize molds of various shapes and specifications according to customer needs, which saves users a lot of later machine maintenance costs.
2. Automatic constant temperature technology: This machine adopts automatic constant temperature technology. The outdoor temperature can be processed at minus 20 degrees or above zero. Do not work in high temperature environment, greatly improving the service life of molds and bearings.
3. Adjustable pressing density: The pressing density of this machine can be adjusted arbitrarily between 0.8-1.4g/㎝3, and it can press fuel pellets and livestock feed pellets.
4. In the process of developing the wood pellet machine, the user's suggestions have been fully considered, and the technological content and functions of the wood pellet machine have been improved on the basis of similar or similar equipment. In terms of price, the affordability and cost of use of the majority of users are fully considered
5. Raw materials come from a wide range of sources, such as sawdust, shavings, bark, sanding powder, waste wood, and branch wood produced in wood processing and wood-based panel production; various straws produced after harvesting crops; other types of combustible raw materials Substances are used as raw materials, without adding any adhesive, and can be processed by equipment to produce biomass pellet fuel.

Features:

• 1: Vertical feeding, directly in place; Feature
• 2: The mold is stationary, the pressure wheel rotates, and the material is centrifugally distributed around; Feature
• 3: The abrasive tool has two layers, which can be used up and down, reducing costs and increasing benefits , and can be dual-purpose, high-yield and energy-saving; Feature
• 4: One abrasive tool, with two hole diameters, can press products of different specifications; Feature
• 5: Large-hole mold, round tube wire connection, increase stroke, increase compactness; Feature
• 6: Ring The vertical structure of the mould, is conducive to heat dissipation and cooling of the granulation chamber; Feature
• 7: The independent frequency conversion discharge device ensures the molding rate of granulation. Feature
• 8: Optional automatic oil injection system, users can choose according to their own factory conditions in order to save costs.

Technical Parameters:

Applications: