Qingdao Huashida Machinery Co., Ltd.
| Payment Terms | L/C,T/T,Western Union,MoneyGram |
| Supply Ability | 2000sets/Day |
| Delivery Time | 60DAYS |
| Packaging Details | Plastic Film and Wooden Case |
| Material | HDPE |
| Application | Pipeline Joint Closure |
| Connection | Welding |
| Brand Name | HUASHIDA |
| Model Number | 200-3000MM |
| Certification | CE |
| Place of Origin | Qingdao, China |
View Detail Information
Explore similar products
HDPE Seamless Electro Fusion Welding Belt / Tape for Preinsulation Pipe Joint
PE Electric Heating Fusion Welding Belt Waterproof Connector PE Electro Fusion
HDPE Pipe Electro-fusion Tape for Thermal crude oil Pre-Insulated Pipeline Girth
Polyethylene Electric Fusion Tape / Belt for Metal Reinforced Spirally
Product Specification
| Payment Terms | L/C,T/T,Western Union,MoneyGram | Supply Ability | 2000sets/Day |
| Delivery Time | 60DAYS | Packaging Details | Plastic Film and Wooden Case |
| Material | HDPE | Application | Pipeline Joint Closure |
| Connection | Welding | Brand Name | HUASHIDA |
| Model Number | 200-3000MM | Certification | CE |
| Place of Origin | Qingdao, China | ||
| High Light | HDPE Electro Fusion Tape ，Pipe Electro Fusion Tape ，Pre Insulated Electro Fusion Tape | ||
Seamless PE Electro Fusion Tape for Preinsulated Pipe Joints
Huashida Seamless HDPE Electro Fusion Sleeves is a pipe interface welding material: high-quality HDPE sheet is cut into sheets that meet the required length, width, and thickness according to actual needs, and then combined with special electric heating wire mesh through special heat sealing equipment. It combines the high tensile toughness strength and shrinkage rate of both electrofusion sleeves and heat shrinkable sleeves.
1. District thermal heating system construction,
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Preinsulated bonded pipe system for directly buried hot water networks;
4. Three PE/PP layers with foam jacket insulation pipes connection;
5. Steel pipes anti-corrosion.
Construction precautions for seamless heat shrinkable joint sleeves
1. Remove dirt. Wipe the surfaces at both ends of the pipe clean and gently sand it with sandpaper.
2. Preheat the temperature at both ends of the pipe to 60°-70°, take off the adhesive tape and place it in an appropriate position, then remove the isolation film.
3. The self-adhesive tape should be placed at the appropriate position on the outer edge of the seamless heat shrinkable joint sleeve. Use a ruler to find the right position and make the marking for pasting.
4. Pull back the seamless heat shrinkable joint sleeve to the appropriate position.
5. Bake the edges 10cm high over high heat. First, bake the top until it softens, then the sides, and finally the bottom. After baking one side, bake the other side. It's best for two people to bake each other at the same time. Repeat this process back and forth
6. During on-site field construction, pay attention to the crosswind and flame direction. The hot spot must not be exposed to the suspended area (in the middle of the joint).
7. It is essential to allow the softened heat shrinkable joint sleeve that has been baked to cool down for a certain period of time. Only in this way can it shrink more tightly
8. Finally, seal both ends with heat shrink tape and inject polyurethane in time. If the product is exposed to the sun for a long time or is placed on the pipe without construction, it will shrink, causing it to seize up with the pipe and be impossible to remove. Therefore, construction and storage should be carried out in accordance with the requirements!
9. Do not bake horizontally. Instead, swing the spray gun up and down to bake
10. Store the product in a cool and well-ventilated place, away from direct sunlight
11. Place horizontally to prevent deformation.
Construction scene photos
Shipping photos
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
3000000-5000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
1. company profileQingdao Huashida Machinery Co., Ltd. is located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have tens of years experience in plastic pipe, sheet, and board extrusion lines, and pipe joints a... 1. company profileQingdao Huashida Machinery Co., Ltd. is located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have tens of years experience in plastic pipe, sheet, and board extrusion lines, and pipe joints a...
Get in touch with us
Leave a Message, we will call you back quickly!