1'' DMF-Y-25 SBFEC Type Full Immersion Diaphragm Pulse Valve Manifold Flat

Product Specification

1'' DMF-Y-25 SBFEC Type Full Immersion Diaphragm Pulse Valve Manifold Flat Mounted DC24V

The SBFEC full immersion diaphragm valves are principally used for the cleaning of dust collector filters with compressed air. These valves have been designed to be assembled on filters and to be mounted onto a square header tank. They are called "full immersion" because they draw the compressed air directly from the tank. with higher pneumatic yield. By request they can be supplied complete with the blow tube- The valve is fixed to the tank with a special counter flange and living screws. The 1 1/2'', 2", 2 1/2", 3'' and 4" are all double diaphragm valves; the 1" is single diaphragm valve. The valves are constructed in anodized die-cast aluminum. to protect them from environmental and corrosive agents.

The SBFEC type full immersion series is available in the following versions:
- DMF-Y. with integrated solenoid pilot
- MF-Y. with remote solenoid pilot mounted in enclosure.

YouTube video of DMF-Y-25 SBFEC Type Manifold Flat Mount Pulse Valve:

Technical paramters of SBFEC Type Full Immersion Diaphragm Pulse Valves:

Tips: All related accessories are also sold, like Pulse Controller, Diaphragm, Solenoid Coil and Armature Assembly.

Main dimension of DMF-Y-25 SBFEC Type Dust Collector Solenoid Valve:

Product Details of DMF-Y-25 SBFEC Replacement Reverse Pulse Jet Valve:

Working priciple of dust collector:

The dust collector drives the dust-containing gas into the dust chamber inside the dust collector. After the air passes through the filter bag, it becomes clean and is discharged by the dust collecting fan, and the dust is prevented from being adsorbed on the outer surface of the filter bag, and then pulsed. The pulse jet valve control blows high-pressure gas into the interior of the dust filter bag, shakes the dust, enters the collecting hopper, and passes through the air-locking device (there are two types of air-locking devices: a star-shaped unloading device and a flapping valve. The specific use environment depends on the row.

Function of dust collector:
There are two main purposes for dust collectors: one is to remove dust from the air, improve the environment, and reduce pollution. Therefore, dust collection equipment for this purpose is sometimes called dust removal equipment, such as dust collection equipment used for exhaust emissions from factories. Another use is to collect and collect powdery products through dust collection equipment, such as the collection and extraction of finished cement by cement systems.

Application of dust collector:

The dust collector is a widely used dust removal device. Generally, there are bag type dust collectors, pulse dust collectors, electric dust collectors, and the like. The dust collector can be used for particle dust collection. The exhaust gas treatment volume is large and the resistance is small. It is suitable for dust removal of cement plant grinding, dryer, crusher and other process equipment, and can also be used for dust removal in grain, metallurgical and other industries.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!