Nanjing Kelisaike Safety Equipment Co., Ltd.
| Description | Continuous Emission Monitoring System for HCl and CO in Waste Incineration Flue Gas (CEMS) |
| Stock | 1set |
| Payment Terms | T/T |
| Shipping Method | LCL |
| product name | online gas analyzer |
| Range | 0-100 Ppm/Mg/M3 |
| Response Time | Less Than 120s |
| material | Alloy, Metal, Stainless Steel |
| Power Supply | 220V ±10%, 50Hz ±1Hz, 5 kVA |
| Light Path | 760mm |
View Detail Information
Explore similar products
KF200 In-situ Laser Gas Analyzer TDLAS For Real-Time Monitoring Of CO NH₃ HCl
Waste Incineration Cems Flue Gas HCl Co Continuous Emission Monitoring System
TDLAS Exdiict6 Tunable Infrared Gas Analyzer IP66 with In Situ Installation
Explosion Proof Industrial Laser Gas Analyzer for Hazardous Gas Detection
Product Specification
| Description | Continuous Emission Monitoring System for HCl and CO in Waste Incineration Flue Gas (CEMS) | Stock | 1set |
| Payment Terms | T/T | Shipping Method | LCL |
| product name | online gas analyzer | Range | 0-100 Ppm/Mg/M3 |
| Response Time | Less Than 120s | material | Alloy, Metal, Stainless Steel |
| Power Supply | 220V ±10%, 50Hz ±1Hz, 5 kVA | Light Path | 760mm |
| High Light | HCl Continuous Emission Monitoring System ，HCl CEMS Gas Analyzers ，Waste Incineration CEMS | ||
WT Online Gas Monitoring System
1. Basic Design Principle of the WT-400 Analysis System
The WT-400 Ammonia Analysis System adopts a high-temperature extractive monitoring method, with a laser-based NH₃ analyzer as the core unit. All gas-contacting components are heated and insulated to above 180℃ throughout the sampling path, ensuring stable and accurate NH₃ measurements even under challenging process conditions.
2. Operating Conditions and Requirements
2.1 General Process Conditions
Maximum dust concentration: < 2000 g/Nm³
Flue gas temperature at the sampling point: ≤ 600℃
Sampling point pressure: -15 to 15 MPa
Tar and benzene content: < 10 g/Nm³
Presence of saturated water vapor
2.2 Environmental Conditions
Temperature control cabinet installed outdoors; analyzer unit installed indoors
Ambient temperature: 5–45℃
Relative humidity: 20–85% RH
Atmospheric pressure: 10–106 kPa (depending on site location)
2.3 Utilities and Gas Supply
Power Supply: 220V ±10%, 50Hz ±1Hz; Power consumption: 5 kVA; free from strong electrical interference
Compressed Air: For purging the sampling system to prevent clogging; must be clean, dry, oil-free, with a pressure of 4–7 kg/cm² to ensure effective cleaning
Standard Gas: For system preprocessing, calibration, and performance verification; must meet the specified purity requirements to maintain measurement accuracy
| No. | Standard Gas Compositions | Standard Gas Concentration | Standard Gas Pressure |
| 1 | N2 | ≥ 99.9999% | 0.5 -10 MPa |
| 2 | NH3 | 80% of the measurement rage | 0.5 -10 MPa |
3. Features of the WTKF200 Ammonia Escape Online Monitoring System
Integrated Sampling Probe – Compact, streamlined design with large dust holding capacity; supports dust filtration up to ≤ 100 g/Nm³ without clogging.
High Filtration Precision – Dust filtration accuracy ＜ 0.1 μm.
High Measurement Accuracy – Analysis accuracy of ±1% FS.
Fast Response – Response time (T90) ≤ 30 s.
High Reliability – Mean Time Between Failures (MTBF) > 3 years.
Low Maintenance – Maintenance interval exceeds 1 year.
Distortion-Free Sampling – High-temperature extractive sampling method ensures accurate, representative measurements.
Temperature-Controlled Sampling – High-temperature, constant-temperature design maintains NH₃ measurement accuracy.
Automatic Purging – Built-in automatic cleaning system removes dust and prevents blockages.
Signal Output – 4–20 mA output; control alarm signal NO/NC, 1A/220V.
We offer fully customized gas online monitoring solutions tailored to the customer’s unique requirements and operating environments, ensuring optimal performance and measurement accuracy.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2004
Total Annual:
1300000-2000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang... Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang...
Get in touch with us
Leave a Message, we will call you back quickly!