Nanjing Kelisaike Safety Equipment Co., Ltd.
| Description | Continuous Emission Monitoring System for HCl and CO in Waste Incineration Flue Gas (CEMS) |
| Stock | 1set |
| Payment Terms | T/T |
| Shipping Method | LCL |
| product name | online gas analyzer |
| Measurement Principle | High-temperature extractive laser NH₃ analysis |
| Sample Gas Temperature | Heated and insulated above 180℃ |
| Sampling Point Pressure: | -15 to 15 MPa |
| Power Supply | 220V ±10%, 50Hz ±1Hz, 5 kVA |
| Maximum Dust Content | < 2000 g/Nm³ |
View Detail Information
Explore similar products
KF200 In-situ Laser Gas Analyzer TDLAS For Real-Time Monitoring Of CO NH₃ HCl
TDLAS Exdiict6 Tunable Infrared Gas Analyzer IP66 with In Situ Installation
Explosion Proof Industrial Laser Gas Analyzer for Hazardous Gas Detection
Kf200 TDLAS Gas Analyzer 24VDC Fixed For Continuous Emissions Monitoring
Product Specification
| Description | Continuous Emission Monitoring System for HCl and CO in Waste Incineration Flue Gas (CEMS) | Stock | 1set |
| Payment Terms | T/T | Shipping Method | LCL |
| product name | online gas analyzer | Measurement Principle | High-temperature extractive laser NH₃ analysis |
| Sample Gas Temperature | Heated and insulated above 180℃ | Sampling Point Pressure: | -15 to 15 MPa |
| Power Supply | 220V ±10%, 50Hz ±1Hz, 5 kVA | Maximum Dust Content | < 2000 g/Nm³ |
| High Light | HCl Continuous Emission Monitoring System ，CEMS Continuous Emission Monitoring System ，CO Continuous Emission Monitoring System | ||
Waste Incineration Cems Flue Gas HCl Co Continuous Emission Monitoring System
1. Basic Design Principle of WT-400 Analysis System
The WT-400 Ammonia Analysis System is a high-temperature extractive monitoring system, with a laser NH₃ analyzer as the core analysis unit. All parts in contact with the sample gas are heated and insulated above 180℃ throughout the process, ensuring accurate and stable NH₃ measurement.
2. Operating Conditions and Requirements
2.1 General Conditions
Maximum dust content: < 2000 g/Nm³
Flue gas temperature at sampling point: ≤ 600℃
Sampling point pressure: -15 to 15 MPa
Tar and benzene content: < 10 g/Nm³
Saturated water vapor present
2.2 Environmental Conditions
The temperature control box is installed outdoors, while the instrument is indoors.
Ambient temperature: 5–45℃
Relative humidity (RH): 20–85%
Atmospheric pressure: 10–106 kPa (depending on local conditions)
2.3 Utilities and Gas Supply Requirements
Power Supply: 220V ±10%, 50Hz ±1Hz, Power: 5 kVA (free from strong electrical interference)
System Gas Supply:
Compressed air – required to purge the sampling system and prevent blockage. Must be clean, dry, oil-free, with a pressure of 4–7 kg/cm² to ensure effective purging.
Standard gas – used for preprocessing, calibration, and verification of the gas analysis system. Ensure the standard gas quality meets the system requirements to guarantee measurement accuracy.
| No. | Standard Gas Compositions | Standard Gas Concentration | Standard Gas Pressure |
| 1 | N2 | ≥ 99.9999% | 0.5 -10 MPa |
| 2 | NH3 | 80% of the measurement rage | 0.5 -10 MPa |
3. Features of WTKF200 Ammonia Escape Online Monitoring System:
1. Streamlined integrated sampling probe, with a large dust holding capacity and a dust filtration capacity ≤ 100 g/NM3, no clogging.
2. Dust filtration accuracy: ＜0.1 μm
3. Analysis accuracy: ±1%FS
4. Response time: T90 ≤ 30 s
5. Mean time between failures: MTBF＞3 years
6. Maintenance interval: ＞1 year
7. The high-temperature extraction sampling method is adopted to ensure no distortion in sampling and accurate analysis.
8. High-temperature and constant temperature sampling design to ensure the accuracy of NH3 concentration.
9. The system has and automatic purging device to dust and prevent blocking.
10. Output signal: 4-20 mA; control alarm signal NO/NC, 1A/220V.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2004
Total Annual:
1300000-2000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang... Nanjing KELISAIKE Safety Equipment Company is one of the largest safety equipment manufacturers, possessing complete product ranges and specifications in the safety equipment industry of mainland China. Founded in 2004, Nanjing KELISAIKE has set three subsidiaries in Beijing, Xi'an, and Xinjiang...
Get in touch with us
Leave a Message, we will call you back quickly!