Briture Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 60 MT per year |
| Delivery Time | 15-18days |
| Packaging Details | 1kg each PE bag, 10kgs each woven bag, 5500kgs/ 1X20`FCL, 13000kgs/ 1X40`HQ without pallet |
| Raw | 100% |
| Fiber | Fibrillated Mesh |
| Crack | 10%min |
| Melting | 160℃ |
| Brand Name | Briture |
| Model Number | 350M |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Concrete Reinforced Polypropylene Fibre Macrofibers 54mm For Construction Mining
6mm Monofilament Reinforced Concrete Polypropylene PP Fiber For Construction
PP Staple Macro Fiber For Concrete Fibers Instead Of Steel Fiber
48mm Embossed Macro Polypropylene Synthetic Fiber PP Fiber For Shotcrete
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 60 MT per year |
| Delivery Time | 15-18days | Packaging Details | 1kg each PE bag, 10kgs each woven bag, 5500kgs/ 1X20`FCL, 13000kgs/ 1X40`HQ without pallet |
| Raw | 100% | Fiber | Fibrillated Mesh |
| Crack | 10%min | Melting | 160℃ |
| Brand Name | Briture | Model Number | 350M |
| Certification | ISO | Place of Origin | China |
| High Light | 350M PP Fiber Fibrillated Mesh ，Cracking Resistance PP Fiber Fibrillated Mesh ，PP Fiber Fibrillated Mesh | ||
PP Fiber Fibrillated Mesh Form 350M
Introduction:
Briture PP Fiber 350M is made of 100% virgin homopolymer polypropylene with form of mesh, it is mainly used for concrete and motar reinforcement,anti-cracking
Function:
Increase seepage resistance Prolong endurance Improve steel protection
Increase cracking resistance Increase fire resistance Strengthen spurt & fatigue
Improve tensile, bending & folding strength Strong acid & alkali resistance and good endurance
Improve plastic deformity
Applying Instruction:
A. Length: Generally, the proper length of the fiber added into concrete is 20 mm, and in the shotcrete is 10mm.
B. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3, and the water-proof layer of the bridge requires 1.35-1.8kg/m3,and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes .The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
C. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too
D. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add sement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolong to make fiber completely.
E. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3 minutes after the addition of polypropylene fiber-mesh.
Application:
A. Projects like concrete road, bridge, airport road and industrial floor which strictly need cracking resistance. The lifespan of projects will be lengthened for 5-10.
B. The walls of tunnels, mines, roofs and reservoir projects with special construction. When using spray technology in concrete construction, the PP fiber added into.
C. River courses and dams, etc. The PP fiber can improve concrete's resistance to crack and squirt and wear to lengthen projects life span.
D. Military defense works, dock banks and piers... It can greatly strengthen the concrete's spurt resistance and improve projects' safety and extend their life span.
Specification:
| Raw | 100% | Fiber | Fibrillated Mesh |
| Crack | 10%min. | Melting | 160℃ |
| Density | 0.91 | Tensile | 560Mpa min. |
| Fiber | 0.035mm | Fiber | 12mm, 18mm,20mm |
| Elastic | 3500Mpa | Width | 5mm |
| Alkali&Acid | Strong | Water | no |
Packing:1kg each PE bag, 10kgs each woven bag, 5500kgs/ 1X20`FCL, 13000kgs/ 1X40`HQ without pallet.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2011
Total Annual:
2,000,0000.00-5,000,000.00
Employee Number:
5~20
Ecer Certification：
Site Member
Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export... Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export...
Get in touch with us
Leave a Message, we will call you back quickly!