Shenzhen Rion Technology Co., Ltd.
| Payment Terms | T/T, PAYPAL |
| Supply Ability | 3000 PCS/MONTH |
| Delivery Time | 7 days for samples |
| Packaging Details | 1pcs vibration sensor in each inner box , 50pcs/ctn |
| Name | road roller vibration measure |
| output | 0~5v |
| power supply | DC 9~36V |
| Deviation calibration | <1mg |
| Noise density | 21μg/√Hz |
| Resonant frequency | 2.4kHz |
| Brand Name | RION |
| Model Number | AKM390-10 |
| Certification | CE, ISO |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
3 Axis Vibration Meter Bridge Safety Three axis Sensor
AKM390 Bridge Vibration Detector , High Output Rate Vibration Monitor
AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration Accelerometer
AKF390 MEMS Based Accelerometer for Low Frequency Vibration Measurement
Product Specification
| Payment Terms | T/T, PAYPAL | Supply Ability | 3000 PCS/MONTH |
| Delivery Time | 7 days for samples | Packaging Details | 1pcs vibration sensor in each inner box , 50pcs/ctn |
| Name | road roller vibration measure | output | 0~5v |
| power supply | DC 9~36V | Deviation calibration | <1mg |
| Noise density | 21μg/√Hz | Resonant frequency | 2.4kHz |
| Brand Name | RION | Model Number | AKM390-10 |
| Certification | CE, ISO | Place of Origin | Guangdong, China |
| High Light | 36V Accelerometer Meter ，5v Output Accelerometer Meter ，MEMS Based Accelerometer ISO | ||
0~5v output road roller vibration measure sensor low deviation accelerometer meter
▶ PRODUCT INTRODUCTION
AKM390 tri-axial accelerometer is a widely used acceleration sensor products independently developed and produced by RION Technology, which can be applied to vibration testing, impact testing and other fields. The product is analog voltage output and can be set with different address codes. Multiple sensors can be connected in series for a long distance, which is convenient for multi-point measurement and data analysis. The AKM390 is a monocrystalline silicon capacitive sensor. It consists of a silicon chip processed by micromachining, a low-power ASIC for signal adjustment, a microprocessor for storing compensation values, and a temperature sensor. This product has low power consumption, solid structure and stable output after calibration. The new electronic configuration provides solid state power for reset and full protection against over-current. The accelerometers have the characteristics of solid structure, low power consumption and excellent deviation stability to ensure the reliability of product output.
▶ PRODUCT FEATURES
★ Three axes (X, Y, Z)
★ Output current: 0~5v
★ Power supply voltage: 9~36V
★ Shock resistance: 2000G
★ Operating temperature: -40℃~ +85℃
★ Storage temperature: -40℃ ~ +85℃
★ Excellent deviation stability, good environmental performance (shock, vibration and temperature)
▶ PRODUCT APPLICATION
★ Bridge
★ Automobile
★ Roller
★ Wind power
★ Medical equipment
★ Large machinery and engine
★ Low frequency vibration and automatic monitoring
★ Crash recording, fatigue monitoring and prediction
★ Traffic system monitoring, subgrade analysis and high-speed railway fault detection
Specification
| AKM390 | Parameter | Unit | |||||
| Measure range | ±2 | ±4 | ±8 | ±10 | ±20 | ±40 | g |
| Deviation calibration | <1 | <1 | <1 | <1 | <1 | <1 | mg |
| Measure axis | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | axis |
| Power on/off repeatability | <2 | <2 | <2 | <2 | <2 | <2 | mg(max) |
| Sensitivity (± 10%) | 1250 | 625 | 312.5 | 250 | 125 | 62.5 | mv/g |
| Temp. coefficient of deviation | 0.01 | 0.01 | 0.01 | 0.05 | 0.05 | 0.05 | %/℃ |
| Resolution/Threshold (@ 1Hz) | < 1 | < 1 | < 1 | < 1 | < 1 | < 1 | mg(max) |
| Nonlinearity | <0.5 | <0.5 | <0.8 | <1 | <1 | <1 | % FS(max) |
| Response frequency | 500 | 500 | 500 | 500 | 500 | 500 | Hz |
| Bandwidth (3DB) | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | Hz |
| Cross-axis sensitivity | 1 | 1 | 1 | 2 | 2 | 2 | % |
| Lateral Vibration Sensitivity Ratio | 1 | 1 | 2 | 5 | 5 | 5 | % |
| Resonant frequency | 2.4 | 2.4 | 2.4 | 5.5 | 5.5 | 5.5 | kHz |
| Noise density | 21 | 21 | 21 | 86.6 | 86.6 | 86.6 | μg/√Hz |
| 0 G Output 2.5V | <0.01 | <0.01 | <0.01 | <0.008 | <0.008 | <0.008 | mV |
| Output voltage | 0~5V | ||||||
| Reliability | MIL-HDBK-217, Class II | ||||||
| Impact resistance | 100g @ 11ms, triaxial (half sine wave) | ||||||
| Recovery time | < 1ms (1000g, 1/2 sin 1ms, impact on i-axis) | ||||||
| Vibration | 20g RMS, 20-2000Hz (random noise, o, p, I 30 min per axis) | ||||||
| Input (VDD _ VSS) | 9-36 VDC | ||||||
| Operating current consumption | <60mA @ 12 VDC | ||||||
| Protection | IP67 | ||||||
| Material | aerospace aluminum | ||||||
| Weight | Product net weight: ≤116g, magnetic base: ≤50g | ||||||
| Size | Product size: L36 × W32 × H24mm Size of magnetic adsorption base plate: L36 × W32 × H8.1mm | ||||||
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2008
Total Annual:
50000000-60000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Shenzhen Rion Technology Co., Limited(RION for short) is a high-tech company specialized in design and manufacturing MEMS inclinometer, 3D compass. RION has excellent developing team both in software and hardware. In hardware, RION has the ability of manufacture and test advanced inertial navig... Shenzhen Rion Technology Co., Limited(RION for short) is a high-tech company specialized in design and manufacturing MEMS inclinometer, 3D compass. RION has excellent developing team both in software and hardware. In hardware, RION has the ability of manufacture and test advanced inertial navig...
Get in touch with us
Leave a Message, we will call you back quickly!