Product Specification

250kW 240V High-Leg Delta Industrial Hybrid Inverter

Megawatt-Scale Power Conversion Solution

1. Product Introduction

This industrial-grade 250kW hybrid inverter represents the pinnacle of three-phase power conversion technology, specifically engineered for heavy industrial applications and utility-scale microgrids.

*Technical Insight: Utilizes patented phase-shifting technology to generate true three-phase 240V (line-to-line) while simultaneously providing 120V (line-to-neutral) output, eliminating the need for external transformers.*

Key Features:

• 250kW continuous (275kVA peak) power output
  *Engineering Note: Achieved through three-level ANPC topology with 98.7% peak conversion efficiency at nominal load.*

• Six independent MPPT channels for maximum solar harvest
  Technical Advantage: Reduces mismatch losses by up to 40% in complex array configurations compared to conventional designs.

• 420-850V battery voltage range for modern storage systems
  *System Benefit: Direct integration with high-voltage lithium batteries reduces system complexity and improves round-trip efficiency by 2-3%.*

2. Technical Specifications

3. Core Technologies

3.1 Advanced Power Conversion

• Utilizes 3-level ANPC topology
  *Technical Benefit: Reduces switching losses by 30% compared to conventional two-level designs, while maintaining <1% THDu in island mode.*

• DSP-controlled IGBT modules
  *Engineering Insight: 16kHz PWM switching frequency with adaptive dead-time control minimizes harmonic distortion.*

3.2 Intelligent Solar Harvesting

• Six independent MPPT channels
  *System Advantage: Each channel operates with 99.9% tracking efficiency and <0.5s refresh rate using optimized perturb-and-observe algorithm.*

• 250-850V operating range
  Technical Note: Incorporates IV curve scanning at startup to identify global maximum power point in shaded conditions.

4. Target Applications

4.1 Heavy Industry

• Steel mill arc furnaces
  *Case Study: Demonstrated ability to handle 200% short-term overloads during electrode strikes with <3% voltage dip.*

• Aluminum smelting operations
  Technical Benefit: Maintains <1% phase imbalance critical for potline operations.

5. Installation Requirements

5.1 Electrical Specifications

• 800A minimum circuit breaker
  Engineering Requirement: NEC 310.16 compliant conductors with 90°C insulation rating.

• Proper grounding system
  Safety Note: Requires <0.1Ω earth ground resistance with 25mm² copper grounding conductor.

6. Compliance & Certification

• UL 1741 SB
  *Certification Detail: Includes comprehensive testing of isolation barriers (3kV AC/5kV DC) and arc fault detection systems.*

• IEEE 1547-2018
  *Grid Compliance: Features <2s anti-islanding protection with frequency ride-through capability.*