Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T or Net 30 days |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days |
| Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Cisco Compatible | SFP-10G-LR |
| Vendor Name | Olinkcom |
| Form Factor | SFP+ |
| Data Rate | 11.3Gb/s bit rates |
| Wavelength | 1310nm |
| Distance | 10km |
| Connector | LC duplex |
| DDM/DOM | Supported |
| Brand Name | OLKOPTO |
| Model Number | OLSP311XL-CD10 |
| Certification | RoHS FCC CE GS UL FDA etc |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
Alcatel Compatible SFP+ ZR 10GBASE 1550nm 80km Transceiver
ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector
Edgecore Compatible 10GBASE-SR SFP+ Transceiver 850nm 300m DOM
Intel Compatible 10G SFP+ Optical Transceiver 1550nm 10GBASE-ER/OC-192
Product Specification
| Payment Terms | T/T or Net 30 days | Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days | Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Cisco Compatible | SFP-10G-LR | Vendor Name | Olinkcom |
| Form Factor | SFP+ | Data Rate | 11.3Gb/s bit rates |
| Wavelength | 1310nm | Distance | 10km |
| Connector | LC duplex | DDM/DOM | Supported |
| Brand Name | OLKOPTO | Model Number | OLSP311XL-CD10 |
| Certification | RoHS FCC CE GS UL FDA etc | Place of Origin | Shenzhen China |
| High Light | 1310nm 10G SFP+ Optical Transceiver ，10km SFP+ Optical Transceiver ，1310nm sfp+ transceiver | ||
1310nm 10km 10G SFP+ Optical Transceiver
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM LC SMF Optical Transceiver
Product Descriptions
Cisco SFP-10G-LR designed for use in 10-Gigabit Ethernet links up to 10km over SingleMode fiber. Low power consumption and low latency allow your network devices to work efficiently, and the DDM function supports real-time monitoring for transceiver status.
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | Ps | 3 | ||
| LOS asserted | VLOS_F | VCC-0.8 | Vcc | V | 4 | |
| LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1290 | 1310 | 1330 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | 0 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 4 | 4.5 | dB | ||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 3.2 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | 1270 | 1600 | nm | |||
| Receiver Sensitivity | PSEN2 | -14.4 | dBm | 2 | ||
| Overload | PAVE | 0.5 | dBm | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -18 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 231-1 with worst ER=4.5@ 10.3125Gb/s.
Product Features
● Low power consumption, < 1W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature: Commerical: 0 to 70 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Fiber Channel
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!