Shenzhen Haneste New Material co.,LTD
| Payment Terms | T/T |
| Delivery Time | 5-7days |
| Packaging Details | 25KG/ Iron Drum |
| Viscosity (cP) (GB/2794-1995) | 2000-2600mpa's |
| Density (g/cm³) (GB/2794-1995) | 1.40±0.02 |
| Operating time (25℃, min) | 40-60 |
| Curing time (25℃, h) | 4-6 |
| Dielectric constant | ≤3.5 |
| Dielectric strength (kv/mm) | ≥14 |
| Elongation at break (%) | ≤100% |
| Exterior | black liquid |
| Brand Name | Hanast |
| Model Number | HN-8808B |
| Certification | ROHS，SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
LED Encapsulation Silicone Potting Compound Gel For Electrical Insulation
LED Strip Light RTV Silicone Potting Glue Adhesive Compound Thermally Conductive
Product Specification
| Payment Terms | T/T | Delivery Time | 5-7days |
| Packaging Details | 25KG/ Iron Drum | Viscosity (cP) (GB/2794-1995) | 2000-2600mpa's |
| Density (g/cm³) (GB/2794-1995) | 1.40±0.02 | Operating time (25℃, min) | 40-60 |
| Curing time (25℃, h) | 4-6 | Dielectric constant | ≤3.5 |
| Dielectric strength (kv/mm) | ≥14 | Elongation at break (%) | ≤100% |
| Exterior | black liquid | Brand Name | Hanast |
| Model Number | HN-8808B | Certification | ROHS，SGS |
| Place of Origin | Guangdong, China | ||
| High Light | compound silicone potting glue ，insulation silicone potting glue ，insulation silicone potting compound | ||
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive Black Two-Component Silicone Adjustable Customization
HN-8808B
1) Good adhesion, no corrosion
2) solid Small chemical shrinkage
3) no heat release, good insulation
4) wide temperature range (-50℃-200℃)
5) waterproof and moisture-proof
Product Model
Potting glue 8808B, is a two-component condensation type room temperature curing silicone rubber, also known as RTV 2 Liquid Silicone Rubber, composed of two parts of A and B. After the A and B components are mixed at 10:1 (mixed ratio), they solidify into a high-performance elastomer through a condensation reaction.
Product Features
1) Good adhesion, no corrosion
2) solid Small chemical shrinkage,
3) no heat release, good insulation,
4) wide temperature range (-50℃-200℃),
5) waterproof and moisture-proof
Main Application
It is mainly used in circuit boards, LED power supplies, waterproof power supplies, automotive electronic modules, electrical appliances, light sources, lamps, and their accessories for potting protection. Especially for potting with adhesive requirements on aluminum substrates.
Technical Sheet
| Before Mixing | ||
| A | B | |
| Exterior | black liquid | Transparent liquid |
| Base chemical composition | Polysiloxane | Polysiloxane |
| Viscosity (cP) (GB/2794-1995) | 2000-2800 | 20-30 |
| Density (g/cm³) (GB/2794-1995) | 1.42±0.02 | - |
| A+B after mixing | ||
| Exterior | black liquid | |
| Base chemical composition | Polysiloxane (Silicone) | |
| Viscosity (cP) (GB/2794-1995) | 2000-2600mpa's | |
| Density (g/cm³) (GB/2794-1995) | 1.40±0.02 | |
| Operating time (25℃, min) | 40-60 | |
| Curing time (25℃, h) | 4-6 | |
| Hardness (shore A) (GB/T531-1999) | 30-40 | |
| Volume resistivity Ω·cm (GB/T 31838.2-2019) | ≥5.0×10 14 |
| Thermal conductivity (W/M▪K) (GB/T 38712-2020) | 0.5±0.1 |
| Dielectric strength (kv/mm) | ≥14 |
| Dielectric constant | ≤3.5 |
| Elongation at break (%) | ≤100% |
Packaging Method
22kg/set (component A 20kg + component B 2kg)
11kg/set (component A 10kg + component B 1kg)
After-sales Service
1. Provide complete product technical information;
2. Debug the product formula according to customer requirements to meet customer requirements for certain special properties of the product;
3. Our company welcomes users to cooperate, communicate, and discuss solutions with our engineers.
Attention
1. The rubber material should be sealed and stored. Use the mixed glue at one time to avoid waste.
2. 10:1 colloid cannot be heated to accelerate solidification after mixing.
3. This product is a non-dangerous product, but please keep it out of your mouth and eyes.
4. This product is non-toxic and non-dangerous. Avoid rain and exposure. Store in a cool and dry place. The shelf life is6months (best use period3 within months)
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be... Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be...
Get in touch with us
Leave a Message, we will call you back quickly!