Shenzhen Haneste New Material co.,LTD
| Payment Terms | T/T |
| Delivery Time | 5-7days |
| Packaging Details | 25KG/ Iron Drum |
| The mixing ratio | A:B=1：1 |
| Viscosity after mixing（cp s. 25℃) | 800～1500 |
| Operate Time （25℃) | 2 h |
| Penetration (1/10mm) | 200-400 |
| Curing conditions (120℃) | 20~30min |
| Cured properties Hardness(Shore A, 24hr) | 0～10 |
| Brand Name | Hanast |
| Model Number | HN-6607A/B |
| Certification | ROHS，SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Heat Curing Silicone Epoxy Potting Compound Material For Encapsulation
Electronic Raw Silicone Material Low Viscosity Potting Compound Glue 2 Component
Two Component Epoxy Potting Compound Resin Thermal Conductive Clear Black Liquid
High Insulation Resin Epoxy Potting Material Glue Raw Material In Bulk
Product Specification
| Payment Terms | T/T | Delivery Time | 5-7days |
| Packaging Details | 25KG/ Iron Drum | The mixing ratio | A:B=1：1 |
| Viscosity after mixing（cp s. 25℃) | 800～1500 | Operate Time （25℃) | 2 h |
| Penetration (1/10mm) | 200-400 | Curing conditions (120℃) | 20~30min |
| Cured properties Hardness(Shore A, 24hr) | 0～10 | Brand Name | Hanast |
| Model Number | HN-6607A/B | Certification | ROHS，SGS |
| Place of Origin | Guangdong, China | ||
| High Light | vulcanizing clear potting epoxy ，Shockproof clear potting epoxy ，vulcanizing electrical potting epoxy | ||
Processing Customized High Transparent Jelly Silicon Gel PCB Circuit Board Protection Shockproof Repairable Electronic Silicon Gel
Characteristic
1. Stable physical and chemical properties, with a wide temperature resistance of -60~230 ℃;
2. Low viscosity, easy to use, no solid fillers, fully transparent, and easy to observe sealing components;
3. Capable of repeated operation, repairability, high flexibility, and extremely low shrinkage rate;
4. Good dust-proof, moisture-proof, shockproof, insulation, and other performance;
5. After solidification, the surface becomes naturally sticky, enhancing the physical adhesion of most substrates without the need for a primer;
6. It can be cured at room temperature or by heating, with the characteristic of faster curing at higher temperatures, and the curing time can be freely controlled;
Product Description:
This product is a very soft, low cross-linking density addition silicone rubber. It is a low-viscosity liquid before vulcanization. After vulcanization, in addition to the general characteristics of addition silicone rubber, it has good shock absorption, moisture resistance and sealing due to its soft nature. properties and excellent dielectric insulation properties over a wide range of temperature and humidity.
Product Features:
1. Medium temperature curing, the curing time can be adjusted according to different temperatures;
2. It is low-viscosity silicone oil before curing and gel elastomer after curing.
Physical Properties:
| Characteristics before curing | ||
| Component | Component A | Component B |
| Color | Transparent liquid | Transparent liquid |
| viscosity(cp s. 25℃) | 800～2000 | 800～1800 |
| Relative density(mpa•s) | 1 ．0～1.12 | 0.98～1.02 |
| The mixing ratio | A:B=1:1 | |
| Viscosity after mixing(cp s. 25℃) | 800～1500 | |
| Operate Time (25℃) | 2 h | |
| Penetration (1/10mm) | ~ | |
| Curing conditions (120℃) | 20~30 min | |
| Cured properties | 0～10 | |
Instructions:
1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use.
2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue.
Package:
This product is 40KG per group;
Component A is 20KG (in barrels), and Component B is 20KG (in barrels)
Storage and transportation:
1,Store in a cool and dry place. The storage period is 6 months (at 25℃).
2, Products that have exceeded the shelf life should be confirmed for any abnormalities before use.
3,Components A and B of the colloid must be sealed and stored, and be careful of leakage during transportation!
4,Such products are non-dangerous goods and can be transported as general chemicals.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be... Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be...
Get in touch with us
Leave a Message, we will call you back quickly!