Shenzhen Haneste New Material co.,LTD
| Payment Terms | T/T |
| Supply Ability | 1000000KG |
| Delivery Time | 3-7 work days |
| Packaging Details | Plastic/Iron Drums |
| Product name | Silicone potting glue |
| Color | Black/White/Transparent color, can customized |
| Application | PCB/Battery/LED |
| Package | 5kgs/25kgs/200kgs/bag |
| Material | Silicone&Agent |
| Keywords | Waterproof Sealant |
| Viscosity | Excellent Viscosity |
| Certificate | MSDS RoHS UL |
| Feature | Low and high Temperature Resistance |
| Thermal conductivity | Customize |
| Brand Name | Hanast |
| Model Number | HN-8806AB |
| Certification | MSDS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
LED Encapsulation Silicone Potting Compound Gel For Electrical Insulation
LED Strip Light RTV Silicone Potting Glue Adhesive Compound Thermally Conductive
Product Specification
| Payment Terms | T/T | Supply Ability | 1000000KG |
| Delivery Time | 3-7 work days | Packaging Details | Plastic/Iron Drums |
| Product name | Silicone potting glue | Color | Black/White/Transparent color, can customized |
| Application | PCB/Battery/LED | Package | 5kgs/25kgs/200kgs/bag |
| Material | Silicone&Agent | Keywords | Waterproof Sealant |
| Viscosity | Excellent Viscosity | Certificate | MSDS RoHS UL |
| Feature | Low and high Temperature Resistance | Thermal conductivity | Customize |
| Brand Name | Hanast | Model Number | HN-8806AB |
| Certification | MSDS | Place of Origin | CHINA |
| High Light | Bulk Silicone Potting Compound ，Waterproofing Silicone Potting Compound ，Waterproofing rtv potting | ||
Product Specification
| Test Items | Test Standard | Units | Product test results | |||
| Part A | Part B | |||||
| Before curing | 1 | Appearance | --- | --- | Grey, fluid | White, fluid |
| 2 | Viscosity | GB/T10247-2008 | 25ºC, mPa·S | 4500~5000 | 4500~5000 | |
| 3 | Density | GB/T 13354-92 | 25ºC, g/cm³ | 1.50±0.05 | 1.50±0.05 | |
| 4 | Mixing Ratio (A : B) | 1:01 | Weight ratio | 100 | 100 | |
| Volume ratio | 100 | 100 | ||||
| 5 | Operating time | Measured | hr | 0.3-0.4 | ||
| 6 | Curing condition | Measured | hr | 4^12 (25ºC,initial cure) | ||
| 0.20 (80ºC) | ||||||
| After Curing | 7 | Appearance | --- | --- | Grey elastomer | |
| 8 | Hardness | GB/T 531.1-2008 | Shore A | 50±5 | ||
| 9 | Thermal conductivity | GB/T10297-1998 | w/m·k | ≥0.76 | ||
| 10 | Expansivity | GB/T20673-2006 | μm/(m,ºC) | 210 | ||
| 11 | Moisture Absorption | GB/T 8810-2005 | 24h,25ºC, % | 0.01~0.02 | ||
| 12 | Volume resistivity | GB/T 1692-92 | (DC500V),Ω · cm | 1.0×10¹⁵ | ||
| 13 | Dielectric intensity | GB/T 1693-2007 | Kv/mm(25ºC) | 18^25 | ||
| 14 | Temperature Resistance | Measured | ºC | -50~+250°c | ||
Product Description
HN-8806 is a two-component addition-type silicone potting rubber that can be cured into a high-performance elastomer at room temperature or with heating. This potting silicone rubber offers excellent electrical insulation, high moisture resistance, and a wide operating temperature range of -50°C to 250°C. It is a low-viscosity potting compound suitable for deep-section curing, with low shrinkage after curing. It does not emit heat or by-products, is non-corrosive to filled and sealed components, and complies with RoHS standards. Its good thermal conductivity effectively transfers heat generated by electronic components.
Applications
Widely used for potting and sealing electronic components, such as various power modules, circuit boards, high-voltage transformers, battery packs, fast-charging adapters, LED outdoor drive power supplies, and other products. It provides flame retardancy, environmental pollution resistance, vibration resistance, circuit and component protection, waterproofing, and thermal conductivity, making it ideal for moisture-proof protection in LED lamps.
Application Method
1.When using, mix components A and B evenly, then weigh them according to the specified ratio. Thoroughly mix with a clean stirring device in a clean container before potting. Vacuum sealing can be applied after removing bubbles.
2.Clean the surface of the potting element. For large products, it is recommended to pot in stages and then cure at room temperature (4-12 hours) or by heating (80°C for 0.5 hours).
3.For automated potting production lines, to ensure accurate mixing ratios of A and B, vacuum each component separately to remove bubbles (foaming time is 5-10 minutes). Then, pump A and B to a static mixer in proportion using a metering pump, and pot after thorough mixing.
Packaging
10KG/Set (A 5kg + B 5kg)
20KG/Set (A 10kg + B 10kg)
50KG/Set (A 25kg + B 25kg)
Storage and Transportation
*This product is non-toxic and non-hazardous. Store in a cool, dry place at room temperature.*
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be... Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be...
Get in touch with us
Leave a Message, we will call you back quickly!