Shenzhen Haneste New Material co.,LTD
| Payment Terms | T/T |
| Packaging Details | 25KG/barrel |
| Curing conditions (120℃) | 20-30mins |
| Operate Time （25℃) | 2h |
| The mixing ratio | A:B=1：1 |
| Component | 2 Components |
| Application | load cell junction box PCB circuit board |
| Feature | high transparent thermal conductivity insulating |
| Brand Name | Hanast |
| Model Number | HN-6607AB |
| Certification | ROHS SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
High Transparent Electronic Silicone Gel Rubber 1:1 PCB Protection Shockproof
Low Viscosity Electronic Silicone Gel rubber Insulation Potting Automotive
OEM Soft Electronic Silicone Gel Liquid Waterproof Transparent For Load Cell
PCB Circuit Board Electronic Potting Gel Silicone Waterproof Sealing Potting
Product Specification
| Payment Terms | T/T | Packaging Details | 25KG/barrel |
| Curing conditions (120℃) | 20-30mins | Operate Time （25℃) | 2h |
| The mixing ratio | A:B=1：1 | Component | 2 Components |
| Application | load cell junction box PCB circuit board | Feature | high transparent thermal conductivity insulating |
| Brand Name | Hanast | Model Number | HN-6607AB |
| Certification | ROHS SGS | Place of Origin | Guangdong, China |
| High Light | Thermal electronic silicone gel ，Potting electronic silicone gel ，liquid silicone gel for electronics | ||
Ecu Liquid Silicone Gel Transparent For Load Cell Junction Box PCB Waterproof Potting Silicone Thermal Gel For Circuit Board Electrical Insulation
Product Description:
This product is a very soft, low crosslinking density addition silicone rubber. It is a low-viscosity liquid before vulcanization. After vulcanization, in addition to the general characteristics of addition silicone rubber, it has good shock absorption, moisture resistance and sealing due to its soft nature. properties and excellent dielectric insulation properties over a wide range of temperature and humidity.
Product Features:
1. Medium temperature curing, the curing time can be adjusted according to different temperatures;
2. It is low-viscosity silicone oil before curing and gel elastomer after curing.
| Characteristics before curing | ||
| Component | Component A | Component B |
| Color | Transparent liquid | Transparent liquid |
| viscosity(cp s. 25℃) | 800～2000 | 800～1800 |
| Relative density(mpa•s) | 1 ．0～1.12 | 0.98～1.02 |
| The mixing ratio | A:B=1:1 | |
| Viscosity after mixing(cp s. 25℃) | 800～1500 | |
| Operate Time (25℃) | 2 h | |
| Penetration (1/10mm) | 200~ 400 | |
| Curing conditions (120℃) | 20~30 mins | |
| Cured properties Hardness(Shore A, 24hr) | 0～10 | |
Instructions:
1. Before mixing, component A needs to be properly stirred manually or mechanically, and component B should be fully shaken in a sealed state before use.
2. When it needs to be attached to the application material, please confirm whether it can be attached before use, and then apply it. 3. Before construction, please weigh and mix according to the weight ratio of A:B = 1:1, and stir thoroughly before applying glue.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be... Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be...
Get in touch with us
Leave a Message, we will call you back quickly!