MINGCHENG GROUP LIMITED
| Payment Terms | L/C, T/T, Western Union, MoneyGram,paypal |
| Supply Ability | 4000kg/day |
| Delivery Time | 5-8 working days after payment |
| Packaging Details | 5kg; 10kg; 20kg; 200kg/ drum |
| Item No. | MCSIL-3020 |
| Hardness | 20 Shore a |
| Mix Ratio | 100:2 |
| Working Time | 30~40min |
| Curing Time | 4~6 Hrs |
| Color | White |
| Tear Strength | 23n/mm |
| Tensile Strength | 3.0 MPa |
| Elongation break | 500% |
| Linear Shrinkage | ≤0.3% |
| Brand Name | MC silicone |
| Model Number | MCSIL-3020 |
| Certification | SGS,REACH |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
25 Shore A High Tear Strength RTV2 Liquid Tin Cure Silicone Rubber For Molding
Good Flowability 20 Shore A RTV-2 Tin Cured Silicone Rubber For Making Gypsum
Alkali Resistant RTV-2 Liquid Tin Cure Silicone Rubber For Making Cement Stone
RTV 2 Mould Making Tin Cure Liquid Silicone Rubber Casting Resin 100:5
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram,paypal | Supply Ability | 4000kg/day |
| Delivery Time | 5-8 working days after payment | Packaging Details | 5kg; 10kg; 20kg; 200kg/ drum |
| Item No. | MCSIL-3020 | Hardness | 20 Shore a |
| Mix Ratio | 100:2 | Working Time | 30~40min |
| Curing Time | 4~6 Hrs | Color | White |
| Tear Strength | 23n/mm | Tensile Strength | 3.0 MPa |
| Elongation break | 500% | Linear Shrinkage | ≤0.3% |
| Brand Name | MC silicone | Model Number | MCSIL-3020 |
| Certification | SGS,REACH | Place of Origin | CHINA |
| High Light | RTV2 Liquid Silicone Rubber ，PU Resin Liquid Silicone Rubber ，Polyester Resin Liquid Silicone Rubber | ||
Specifications of RTV-2 Silicone Rubber
1. Good flow ability and long working time
2. Medium hardness
3. Easy de-mould from shoe mold
4. Low linear shrinkage
Applications of RTV-2 Silicone Rubber
MCSIL-S silicone rubber is suited for shoe mold, resin crafts, simple products, sand casting mold making, and shoe mold by pouring way.
How to make the silicone mold?
1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35C (95F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
3. Pouring the mixture and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Storage of RTV-2 Silicone Rubber
When the silicone rubber is stored at or below 30 C (85F) in the original unopened containers, silicone base and CA30 curing agent have a usable life of 12 months from the date of production.
Note of RTV-2 Silicone Rubber
RTV silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.
Packing of RTV-2 Silicone Rubber
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!