Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Standard Exporting Plywood Case |
| Standard Clause | IEC60884 Clause 24.7 |
| Test Stroke | 9mm |
| Test Weight | 4N |
| Abrasion Rate | 30 movements per minute |
| Test Stations | One (can be customized) |
| Test Figure | Figure 28 |
| Brand Name | Sinuo |
| Model Number | SN2128 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Standard Exporting Plywood Case |
| Standard Clause | IEC60884 Clause 24.7 | Test Stroke | 9mm |
| Test Weight | 4N | Abrasion Rate | 30 movements per minute |
| Test Stations | One (can be customized) | Test Figure | Figure 28 |
| Brand Name | Sinuo | Model Number | SN2128 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Insulation Sleeve Wear Resistance Testing Equipment ，IEC 60884 Wear Resistance Testing Equipment | ||
IEC 60884 Plugs Insulation Sleeve Wear Resistance Testing Equipment
Standards:
IEC 60884-1:2006 "ThePlugs and sockets for household and similar purposes. Part 1: General requirements" Article 24.7 and Figure 28.
BS 1363-1-2012 "The13A plugs, sockets, adapters and connecting units - Part 1: Specification for rewired and non-rewired 13A plugs
Performance:
The scraping frequency of this test device is 30 times per minute, and the return and return are recorded as one time each. The number of tests can be up to 0 ~ 999999 times, and the number of tests can be adjusted and set. The working stroke is 9mm, and the insulating sleeve is scraped out 7mm. Pressure load of 4 N, scraper wire diameter of 1 mm, effective length of 6 mm
Structure:
It consists of a horizontal beam and a linearly moving fixture base. The end of the beam is equipped with a U-shaped head with a diameter of 1 mm short steel wire bent (the two points of the U-shaped head are fixed vertically on the beam). The U-shaped bottom edge of steel wire is 6mm straight working position. The 6mm straight bottom edge of U-shaped steel wire is pressed on the insulating sleeve of the bolt, and the motor drives the clamp seat with the bolt to reciprocate, so as to test the friction between the steel wire and the bolt insulation sample.
Sample range, use, principle, structure and use environment:
| Samples and Restrictions | Insulation sheath for plug pin |
| Test purposes | It is suitable for testing the wear resistance of insulation sleeve of plug pin |
| The test principle of | Using motor drive eccentric mechanism to achieve the reciprocating scraping of the latch jacket |
| Equipment structure and characteristics | It consists of a horizontal beam and a linearly moving fixture base. The end of the beam is equipped with a U-shaped head with a diameter of 1 mm short steel wire bent (the two points of the U-shaped head are fixed vertically on the beam). Steel wire U bottom line for 6mm straight working position. The 6 mm straight bottom edge of the u - shaped steel wire is pressed on the insulating sleeve of the bolt, and the motor drives the clamp seat to reciprocate with the bolt, so as to test the friction between the steel wire and the bolt insulation sample. Equipment size: width × depth × height about 600 × 600 × 500 (mm), equipment weight: 70kg. |
| Using the environment | Power supply: AC220V±10%/50-60Hz, working temperature 0-40℃ humidity 30%-90%; |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!