Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 sets per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Applied Standards | IEC60335 and etc. |
| Applied Clauses | Cause 3.1.9.108 & 15.2 figure 103 |
| Wall Thickness | 2mm |
| Vessels Quantity | 5 pcs |
| Aluminum Vessels Function | Water simmering test |
| Vessels Material | 6061 aluminum |
| Vessels Brand | Sinuo |
| Warranty Time | One year |
| Brand Name | Sinuo |
| Model Number | SN1115A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | T/T | Supply Ability | 20 sets per month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Applied Standards | IEC60335 and etc. | Applied Clauses | Cause 3.1.9.108 & 15.2 figure 103 |
| Wall Thickness | 2mm | Vessels Quantity | 5 pcs |
| Aluminum Vessels Function | Water simmering test | Vessels Material | 6061 aluminum |
| Vessels Brand | Sinuo | Warranty Time | One year |
| Brand Name | Sinuo | Model Number | SN1115A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC60335 Aluminum Vessels ，Hotplates Test Aluminum Vessels | ||
IEC60335 Aluminum Vessels For Hotplates Test Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm
Standards & Clauses:
The vessel conforms to the standard requirements of IEC60335-2-9:2016 clause 3.1.9.108 & 15.2 figure 103, IEC 60335-2-6:2018 clause 15.2 figure 101, and etc. One set includes Ф110 mm, Ф145 mm, Ф180 mm, Ф220 mm, Ф300mm, total 5 pcs.
The vessel simulates the cooking appliance which is placed on the hotplate. The vessel is made of unpolished commercial quality aluminum.
Technical Parameters:
| Diameter of cooking zone mm | Approximate dimension | ||
| a mm | b mm | c mm | |
| ≤110 | 110 | 140 | 8 |
| ＞110≤145 | 145 | 140 | 8 |
| ＞145≤180 | 180 | 140 | 9 |
| ＞180≤220 | 220 | 120 | 10 |
| ＞220≤300 | 300 | 100 | 10 |
NOTE: The base of the vessel shall not be convex. The concavity of the base of the vessel shall not exceed than 0.05 mm.
Actual inspection size in the following table:
| Outer diameter a | b | c | Material | With lid |
| 110 | 2 | 8.05 | AL6061 | With lid |
| 145 | 1.9 | 8.04 | AL6061 | With lid |
| 180 | 1.925 | 8.98 | AL6061 | With lid |
| 220 | 1.995 | 9.99 | AL6061 | With lid |
| 300 | 1.999 | 10.02 | AL6061 | With lid |
Samples and Restrictions:
Hotplates, induction hotplates, hob elements, induction hob elements
Application:
Used to simulate the containers that placed on the hotplates, induction hotplates, hob elements, induction hob elements and other containers under normal working conditions
Test Principle:
Aluminum vessels are used to simulate the containers containing water, and the low carbon steel vessels are used to simulate the containers containing cooking oil.
Structure:
Aluminum vessels: Φ110mm *1 pc, Φ145mm*1 pc, Φ180mm*1 pc, Φ220mm*1 pc, Φ300mm*1 pc
Low carbon steel vessels: Φ110mm *1 pc, Φ145mm*1 pc, Φ180mm*1 pc, Φ220mm*1 pc, Φ300mm*1 pc
Test procedures and operation
Take IEC60335-2-9:2016 clause 3.1.9.108 & 15.2 figure 103:
Hotplates, other than induction hotplates, are operated with vessels containing water. The vessels are made of unpolished commercial quality aluminum, have a flat bottom and are covered with a lid. A suitable vessel is specified in Figure 103. controls are adjusted to their highest setting until the water boils and then adjusted so that the water simmers. Water is added to maintain the level during simmering.
Note 1: The lid is positioned so that steam does not affect the test.
For all hotplates, the diameter of the bottom of the vessel is approximately equal to the diameter of the cooking zone and the quantity of liquid is specified in Table 101. The vessel is positioned centrally on the cooking zone.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!