Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 60 Sets Per Month |
| Delivery Time | 10 Days |
| Packaging Details | Standard Exporting Boxed |
| Applied standard | IEC 62368-1 |
| Applied clause | Clause 5.4.11 |
| Test sample | Current leakage |
| Test condition | Normal / abnormal / single fault |
| Specification | 5000 Ω |
| Warranty | One Year |
| Brand Name | Sinuo |
| Model Number | SN2210-81 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
PLC Control Electrical Appliance Testing Equipment Cordless Kettle Abnormal
IEC60335-2-24 Single Station Refrigerator Freezer Door Open Endurance and Pull
16 Channels Temperature Measurement and Recording Instrument 1000 ℃ Temperature
Black Plywood Test Corner Electrical Appliance Testing Equipment Temperature
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 60 Sets Per Month |
| Delivery Time | 10 Days | Packaging Details | Standard Exporting Boxed |
| Applied standard | IEC 62368-1 | Applied clause | Clause 5.4.11 |
| Test sample | Current leakage | Test condition | Normal / abnormal / single fault |
| Specification | 5000 Ω | Warranty | One Year |
| Brand Name | Sinuo | Model Number | SN2210-81 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Clause 5.4.11 Non Inductive Resister ，IEC 62368-1 Non Inductive Resister ，Current Leakage Non Inductive Resister | ||
IEC 62368-1 Clause 5.4.11 Non - Inductive Resister 5k Ω For Current Leakage
Product Information:
This non-inductive resistor, category: wire-wound resistors. It is required by IEC 62368-1:2018 clause 5.4.11 and Annex H, IEC 60950-1 clause 2.4.2, IEC 60065-1:2014 clause 7. Used to test the leakage current between primary and secondary.
Test Procedures and Operation
Please refer to the relevant standards.
Take IEC 60335-1 clause 8 as an example:
Voltages and currents are measured between the relevant parts and each pole of the supply source. Discharges are measured immediately after the interruption of the supply. The quantity of electricity in the discharge is measured using a resistor having a nominal non-inductive resistance.
NOTE 1 Details of a suitable circuit for measuring the current are given in figure 4 of IEC 60990.
NOTE 2 The quantity of electricity is calculated from the sum of all areas recorded on the voltage/time graph without taking voltage polarity into account.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!