Payment Terms | L/C, T/T, Western Union, MoneyGram |
Supply Ability | 20 Sets Per Month |
Delivery Time | 20 days |
Packaging Details | Carton Box |
Applied Standard | IEC60320-1 |
Applied Clause | Clause 23.3 |
Humidity | 30%-90% |
Force Range | 0-100N |
Cable Bending Height | 40±2 mm |
Pulling Method | Manual operation |
Test Station | Single |
Working temp. | 5-35℃ |
Brand Name | Sinuo |
Model Number | SN2104 |
Certification | Calibration Certificate (Cost Additional) |
Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-24 φ75mm Sphere Test Probe with Nylon Handle
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 20 Sets Per Month |
Delivery Time | 20 days | Packaging Details | Carton Box |
Applied Standard | IEC60320-1 | Applied Clause | Clause 23.3 |
Humidity | 30%-90% | Force Range | 0-100N |
Cable Bending Height | 40±2 mm | Pulling Method | Manual operation |
Test Station | Single | Working temp. | 5-35℃ |
Brand Name | Sinuo | Model Number | SN2104 |
Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
High Light | Coupler Lateral Pulling Test Apparatus ,IEC 60320-1 Pulling Test Apparatus |
IEC 60320-1 Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A
Equipment overview:
Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19.
It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler.
Test principle:
Plug a connector rated over 0.2 A into an appliance inlet that corresponds to the type of connector to be tested and complies with the relevant standard table. Appliance input sockets are installed in suitable test equipment, an example is shown in IEC 60320-1 Figure 19 with pins facing up. Should conform to the dimensions of 40 mm ± 2 mm. The lateral pull as specified in IEC 60320-1 Table 7 is first applied to the cord in a direction perpendicular to the plane containing the current-carrying pin axis and then released immediately. This sequence of operations is performed 50 times in one direction, then 50 times in the opposite direction.
Structure:
The connector test should be equipped with an appliance inlet of a type corresponding with the connector to be tested and complying with the relevant standard sheet.
Technical parameters:
Test station | Single station |
Flexible cable bending height | 40±2 mm,adjustable |
Working temperature | 5-35℃ |
Humidity | 30%-90% |
Pull force range | 0-100N |
Pulling method | 50 times in one direction and then 50 times in the opposite direction |
Cable selection and corresponding pull value table | ![]() |
Appliance input socket | Optional gauge according to requirements |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!