China factories

China factory - Sinuo Testing Equipment Co. , Limited

Sinuo Testing Equipment Co. , Limited

  • China,Guangzhou ,Guangdong
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment
China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment

  1. China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment
  2. China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment
  3. China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment
  4. China EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment

EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment

  1. MOQ: 1
  2. Price: Negotiable
  3. Get Latest Price
Payment Terms L/C, T/T, Western Union, MoneyGram
Supply Ability 50 sets per month
Delivery Time 7 Days
Packaging Details Carton Box
Control mode Mechanical
Impact energy 0.2, 0.35, 0.5, 0.7, 1.0
Impact element (equivalent mass) 150g±1g (200g), head is R10 polyamide hemisphere
Applied Standard EN 60898-1
Swing tube Length 1000 mm, outer diameter 9 mm, wall thickness 0.5 m
Size WDH=about 600×600×1600mm
Brand Name Sinuo
Model Number SN2157-1
Certification Calibration Certificate (Cost Additional)
Place of Origin China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms L/C, T/T, Western Union, MoneyGram Supply Ability 50 sets per month
Delivery Time 7 Days Packaging Details Carton Box
Control mode Mechanical Impact energy 0.2, 0.35, 0.5, 0.7, 1.0
Impact element (equivalent mass) 150g±1g (200g), head is R10 polyamide hemisphere Applied Standard EN 60898-1
Swing tube Length 1000 mm, outer diameter 9 mm, wall thickness 0.5 m Size WDH=about 600×600×1600mm
Brand Name Sinuo Model Number SN2157-1
Certification Calibration Certificate (Cost Additional) Place of Origin China
High Light Mechanical Pendulum Impact Test EquipmentGB10963.1 Pendulum Impact Test Equipment

EN 60898-1 Circuit Breaker Energy Pendulum Impact Test Equipment

 

 

Product overview
This equipment is also called Impact resistance test equipment. It adopts a floor-standing structure and does not require installation. Specimen mounting bracket up, down, left and right.
The front and rear three axes are adjustable, and the swing lever can adjust the release angle through the pivot, so as to achieve impact on the front and side of the sample, covering impact test requirements for most similar products.

 

Equipment principle:
Designed according to the requirements of
EN 60898-1, refer to test Eha: pendulum, impact element
It is freely released at a certain drop height (angle conversion) through a 1 meter swing tube, and hits at the lowest point in the vertical direction
The sample undergoes the transformation from gravitational potential energy to kinetic energy to achieve the purpose of impact test on the sample.

 

Test process:
According to the standard requirements, select the fixture to install the sample, and the impact element just fits the impact point in the vertical free state.
According to the standard impact energy requirement of 0.2J, rotate the swing arm until the scale pointer indicates the drop height of the angle plate 100mm (angle conversion), and lock the release device. Note that for energy testing required by other standards, you can select the drop height on the angle plate as shown in the table below. The device is only equipped with an impact of 0.2kg equivalent mass.
Pull out the spring release device, the impact element is released freely through the 1m pendulum tube, and hits the specimen at the lowest point in the vertical direction.
Adjust the three-axis mechanism to make the sample repeat the impact test on different impact positions according to the above method according to the requirements of the standard. 

 

Main Technical Parameter:

Control mode Mechanical
Impact energy 0.2, 0.35, 0.5, 0.7, 1.0
Impact element (equivalent mass) 150g±1g (200g), head is R10 polyamide hemisphere
Swing tube Length 1000 mm, outer diameter 9 mm, wall thickness 0.5 m
Size WDH=about 600×600×1600mm

 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Total Annual:

    800000-1500000

  • Employee Number:

    30~50

  • Ecer Certification:

    Verified Supplier

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...

+ Read More

Get in touch with us

  • Reach Us
  • Sinuo Testing Equipment Co. , Limited
  • Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
  • https://www.sinuotek.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement