Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 20 Sets / Month |
| Delivery Time | 30 days |
| Packaging Details | Standard Exporting Plywood Case |
| Standard | IEC60884 Clause 12.2.5, Figure 11 |
| Test sample | Terminals with Screw Clamping |
| Rotate Rate | 10±2 RPM |
| Test Height | 260, 280, 300, 320mm |
| Gyration Diameter | 75mm |
| Bushing Diameter | 6.5, 9.5, 13, 14.5mm |
| Brand Name | Sinuo |
| Model Number | SN2111 |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-24 φ75mm Sphere Test Probe with Nylon Handle
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 20 Sets / Month |
| Delivery Time | 30 days | Packaging Details | Standard Exporting Plywood Case |
| Standard | IEC60884 Clause 12.2.5, Figure 11 | Test sample | Terminals with Screw Clamping |
| Rotate Rate | 10±2 RPM | Test Height | 260, 280, 300, 320mm |
| Gyration Diameter | 75mm | Bushing Diameter | 6.5, 9.5, 13, 14.5mm |
| Brand Name | Sinuo | Model Number | SN2111 |
| Certification | Calibration Certificate(cost additional ) | Place of Origin | China |
| High Light | switch endurance tester ，switch life testing machine | ||
IEC 60884-1 Figure 11 Conductors Undue Damage Checking Test Apparatus
Standard: IEC60884-1 clause 12.2.5, figure 11.
Application: It is used to check terminals with screw clamping shall be so designed and constructed that they clamp the conductor(s) without undue damage to the conductor(s).
Test sample: Plugs and socket-outlets terminals.
Technical Parameters:
| Model | SN2111 |
| Test rate | 10±2 RPM |
| Diameter of gyration | 75mm |
| Test times | 0～9999 |
| Test weights | 0.3, 0.4, 0.7, 0.9, 1.4, 2kg |
| Test height | 260, 280, 300, 320mm |
| Diameter of bushing | 6.5, 9.5, 13, 14.5mm |
| Complied standards | IEC60884-1, IEC60669-1 |
Test processes:
The terminal is placed in the test apparatus according to figure 11 and fitted with rigid, solid, stranded and/or flexible conductor(s), according to table 3 first with the smallest and then with the largest nominal cross-sectional area, the clamping screw(s) or nut(s) being tightened with the torque according to table 6.
Where rigid stranded conductors do not exist, the test may be made with rigid solid conductors only. In this case, there is no need for further tests.
The length of the test conductor shall be 75 mm longer than the height (H) specified in table 9.
The end of the conductor is passed through an appropriate bushing in a plate positioned at a height (H) below the equipment, as given in table 9. The bushing is positioned in a horizontal plane such that its centre line describes a circle of 75 mm diameter, concentric with the centre of the clamping unit in the horizontal plane; the platen is then rotated at a rate of (10 ± 2) r/min.
The distance between the mouth of the clamping unit and the upper surface of the bushing shall be within ±15 mm of the height specified in table 9. The bushing may be lubricated to prevent binding, twisting, or rotation of the insulated conductor.
A mass as specified in table 9 is suspended from the end of the conductor. The duration of the test is approximately 15 min.
During the test, the conductor shall neither slip out of the clamping unit nor break near the clamping unit, nor shall the conductor be damaged in such a way as to render it unfit for further use.
Comparison table of the weight, height and bushing as below:
| Nominal cross-sectional area of conductor ( mm²) | Diameter of bushing Hole ( mm) | Height (mm) | Mass for conductor (kg) |
| 0.5 | 6.5 | 260 | 0.3 |
| 0.75 | 6.5 | 260 | 0.4 |
| 1.0 | 6.5 | 260 | 0.4 |
| 1.5 | 6.5 | 260 | 0.4 |
| 2.5 | 9.5 | 280 | 0.7 |
| 4.0 | 9.5 | 280 | 0.9 |
| 6.0 | 9.5 | 280 | 1.4 |
| 10.0 | 9.5 | 280 | 2.0 |
| 16.0 | 13.0 | 300 | 2.9 |
| |||
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!