Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 sets per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Test Stations | 5 stations |
| Test Speed | 10 r/min, presettable, accuracy ±1 r/min |
| Bending Angle | 40°±1° |
| Load Weights | 5 pieces each of 2.5kg and 5kg |
| Arm Length | 300mm±50mm |
| Test Count | 0-999999 times |
| Brand Name | Sinuo |
| Model Number | SN1704-5 |
| Certification | Calibration Certificate(Cost Additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | T/T | Supply Ability | 20 sets per month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Test Stations | 5 stations | Test Speed | 10 r/min, presettable, accuracy ±1 r/min |
| Bending Angle | 40°±1° | Load Weights | 5 pieces each of 2.5kg and 5kg |
| Arm Length | 300mm±50mm | Test Count | 0-999999 times |
| Brand Name | Sinuo | Model Number | SN1704-5 |
| Certification | Calibration Certificate(Cost Additional ) | Place of Origin | China |
IEC60335-2 Current-Carrying Hoses Bending Resistance Tester 5 Station
Product information:
This device meets the standard of IEC60335-2-2 clause 21.103, IEC 60312 clause 6.9, suitable for the Current-carrying hoses bending resistance tester. Compliance is checked by the following test.
The end of the hose intended to be connected to the motorized cleaning head is attached to the pivoting arm of the test equipment shown in Figure 17. The distance between the pivot axis of the arm and the point where the hose enters the rigid part is 300 mm ± 50 mm. The arm can be raised from the horizontal position by an angle of 40°±1°. A mass of 5 kg is suspended from the other end of the hose or from a convenient point along the hose so that when the arm is in the horizontal position the mass supported and there is no tension on the hose.
Test Samples and Limitations:
Vacuum cleaner hoses,Water-suction cleaning appliance hoses,Washing machine water hoses.
Equipment Structure:
Technical parameters:
| Operating Environment | Power supply: AC220V±10% / 50-60Hz Operating temperature: 0-40℃ Humidity: 30%-90% |
| Test stations | 5 stations |
| Electrical control method | PLC intelligent control, touchscreen operation |
| Drive method | Motor-driven |
| Test speed | 10 r/min, presettable, accuracy ±1 r/min |
| Bending angle | 40°±1° |
| Load weights | 5 pieces each of 2.5kg and 5kg |
| Arm length | 300mm±50mm |
| Test count | 0-999999 times, presettable, default 10000 times |
| Metal slope | Max hose deflection angle 3° during weight sliding, slope angle 3°±1° |
| Equipment size | approximately 700×500×1150 (mm) (W×H×D) |
| Equipment weight | 100kg |
Testing Principle:
Uses PLC control and touchscreen operation.Controls the motor to drive the eccentric wheel mechanism to lift the mechanical arm (up to 40°±1°).Test count and speed can be preset,the machine stops automatically upon reaching the preset count.
Fix the end of the current-carrying flexible hose intended to connect to the power-cleaning head to the pivot arm of the device (distance to rigid part: 300±50mm).Hang a 5kg weight on the other end of the hose (the weight can slide along the weight slide plate).The pivot arm lifts from horizontal to 40°±1°, repeats 2500 cycles.Rotate the hose end by 90° and repeat the above test for another 2500 cycles.After completion, perform an electrical strength test on the sample.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!