Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 5 set per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Test Stations | One station |
| Control Method | PLC control |
| Drive Mode | Servo motor drive |
| Clamping Method | Vacuum suction cup |
| Door Angle | 0-130°, can be preset |
| Door Speed | 0-360°/s, can be preset |
| Test Times | 0-999999times |
| Load Voltage | 0-250V, adjustable |
| Brand Name | Sinuo |
| Model Number | SN1401A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | T/T | Supply Ability | 5 set per month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Test Stations | One station | Control Method | PLC control |
| Drive Mode | Servo motor drive | Clamping Method | Vacuum suction cup |
| Door Angle | 0-130°, can be preset | Door Speed | 0-360°/s, can be preset |
| Test Times | 0-999999times | Load Voltage | 0-250V, adjustable |
| Brand Name | Sinuo | Model Number | SN1401A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Washing Machine Door Endurance Testing Equipment ，IEC 60335-2-7 Door Endurance Testing Equipment | ||
IEC 60335-2-7 Pulsar Washing Machine Door Endurance Testing Equipment Durability Testing
Product information:
Standard: Complies with clause 18.101 of IEC60335-2-7:2016.
Uses: It is used to test the durability of the interlocking device of pulsar washing machine lid, and the force test when the interlock is actuated, so as to verify the reliability of the interlocking device; also used to assist other tests for repeated opening and closing operations of the pulsar washing machine lid.
Test samples: Pulsar washing machine.
structure:
The equipment consists of electrical control cabinet (including load voltage regulating device), rack and manipulator. There is one test station for testing pulsar washing machine with a cover top.
Equipment size: about: (W*D*H) 1300 * 1200 * 1500 (mm) Equipment weight: 200kg
Equipment principle:
The on/off actions of the interlocking device are controlled through developed program, the manipulator is driven by servo motor to reciprocating open and close the lid at a certain speed with a fixture clamping the lid, thus, to verify the reliability of the interlocking device. A force sensor is mounted on the manipulator to form a closed loop control with the servo motor, to accurately control the lid opening/closing force values.
Technical parameter:
| Test Stations | One station for pulsator washing machine with lid |
| Control Method | PLC intelligent integrated control, 7-inch humanized touch interface operation |
| Drive Mode | Servo motor drive |
| Clamping Method for Specimen | Vacuum suction cup, pneumatic |
| Lid Opening or Closing Speed | 0-360°/s (1.5m/s), can be preset |
| Lid Opening or Closing Angle | 0-130°, can be preset |
| Test Times | 0-999999times, can be preset |
| Lid Opening or Closing Force | 0-200N, can be preset (the opening force value is only for the pull test when the interlock device is actuated to lock the door) |
| Load Voltage | 0-250V, adjustable |
| Auxiliary Action Mechanism | Washing machine starts pressing cylinder (can be customized) |
| Test Contents | Pulsator washing machine lid interlocking device endurance test (IEC 60335-2-7 clause 18.101) |
| Safety Protection | |
| Power | Leakage protection, overload and short circuit protection |
| Motor | Overload, short circuit protection |
Precautions:
The operating angle must be confirmed before the suction cup of the manipulator and the sample cover are sucked together, otherwise the sample will be damaged.
Before starting the voltage, the voltage adjustment knob must be adjusted to the minimum position.
Lubricate the manipulator regularly.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!