JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 1000 tons per month |
| Delivery Time | 7 days after receive the deposit |
| Packaging Details | export packing |
| Secondary Or Not | Non-secondary |
| Size range | 1/2''-25'' |
| Technique | SEAMLESS |
| Surface Treatment | Pickled |
| LENGTH | 6M |
| Thickness | SCH10-SCH160 |
| Brand Name | WHEN ZHOU |
| Model Number | S32550 F61 2507 Cu |
| Certification | SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
TP316L Stainless Steel Seamless Tube ASTM A312 SS Seamless Pipes
Duplex 2205 / 1.4462 / S31803 / S32205 Stainless Steel Seamless Tube
UNS32750 Alloy 32750 Duplex Stainless Steel Pipe OD3 - 200mm WT0.5 - 12 mm
SUS630 Stainless Steel Tube 17-4PH Tube Martensitic Precipitation Hardening
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 1000 tons per month |
| Delivery Time | 7 days after receive the deposit | Packaging Details | export packing |
| Secondary Or Not | Non-secondary | Size range | 1/2''-25'' |
| Technique | SEAMLESS | Surface Treatment | Pickled |
| LENGTH | 6M | Thickness | SCH10-SCH160 |
| Brand Name | WHEN ZHOU | Model Number | S32550 F61 2507 Cu |
| Certification | SGS | Place of Origin | CHINA |
| High Light | grade f61 stainless steel seamless pipe ，cold drawn stainless steel seamless pipe ，astm a182 seamless stainless steel tube | ||
MITTEL STEEL supply to you high quality W-Nr 1.4462 duplex steel pipe, W-Nr 1.4417 duplex steel pipe,W-Nr 1.4507 duplex steel pipe,W-Nr 1.4501 duplex steel pipe,W-Nr 1.4362 duplex steel pipe,W-Nr 1.4410 duplex steel pipe, W- duplex steel pipe, we are aslo W-Nr 1.4462 duplex steel pipe manufacturer , W-Nr 1.4417 duplex steel pipe exporter,W-Nr 1.4507 duplex steel pipe producer,W-Nr 1.4501 duplex steel pipe stockholder,W-Nr 1.4362 duplex steel pipe supplier,W-Nr 1.4410, W- duplex steel pipe
duplex steel pipe details description:
| 1. | Item | s steel pipe | |
| 2. | Material | W-Nr 1.4417,W-Nr 1.4507,W-Nr 1.4501,W-Nr 1.4362,W-Nr 1.4410, W-Nr 1.4460, 2205, 2507, 2304,etc. | |
| 3. | Specifications | Wall thickness | 1.0-150mm(SCH10S-XXS) |
| Outside diameter | 3.0-2500mm(1/8"-100") | ||
| Length | 6m,5.8m,8m,11.8m,12m or as required. | ||
| Steel Grade | C≤ | Mn≤ | Si≤ | S≤ | P≤ | Cr | Ni | Mo | Cu≤ | N |
| S32750((2507) 00Cr22Ni7Mo4N | 0.03 | 1.20 | 0.80 | 0.020 | 0.035 | 24.0/ 26.0 | 6.0/ 8.0 | 3.0/ 5.0 | 0.50 | 0.24/ 0.32 |
| S31803(2205) 00Cr22Ni5Mo3N | 0.03 | 2.00 | 1.0 | 0.02 | 0.030 | 21.0/ 23.0 | 4.50/ 6.50 | 2.50/ 3.50 | 0.08/ 0.20 | |
| S31500(3RE60) 00Cr18Ni5Mo3Si2 | 0.03 | 1.2/ 2.00 | 1. 4/ 2.00 | 0.030 | 0.030 | 18.0/ 19.0 | 4.25/ 5.25 | 2.50/ 2.00 | 0.05/ 0.10 |
| Steel Grade | Heat Treatment℃ | Ab(MPa)≥ | As(MPa)≥ | EL≥ | HB | HRC |
| S32750(2507) 00Cr22Ni5Mo3N | 1025-1125 | 800 | 550 | 15 | 310 | 32 |
| S31803(2205) 00Cr22Ni5Mo3N | 1020-1100 | 620 | 450 | 25 | 290 | 30.5 |
| S31500(3RE60) 00Cr18Ni5Mo3Si2 | 980-1040 | 630 | 440 | 30 | 290 | 30.5 |
Product Analysis
1 An analysis of either one billet or one length of flat-rolled stock or one tube shall be made from each heat. The chemical composition thus determined shall conform to the
requirements specified.
2 A product analysis tolerance (see the annex table on Chemical Requirements (Product Analysis Tolerances) in SpecificationA 480/A 480M) shall apply. The product analysis
tolerance is not applicable to the carbon content for material with a specified maximum carbon of 0.04 % or less.
3 If the original test for product analysis fails, retests of two additional billets, lengths of flat-rolled stock, or tubes shall be made. Both retests for the elements in question shall meet the requirements of this specification; otherwise, all remaining
material in the heat shall be rejected or, at the option of the producer, each billet or tube may be individually tested for acceptance. Billets, lengths of flat-rolled stock, or tubes that do not meet the requirements of this specification shall be rejected.
product show:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
1998
Total Annual:
80Millen-100 Millen
Employee Number:
200~500
Ecer Certification：
Verified Supplier
Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta... Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta...
Get in touch with us
Leave a Message, we will call you back quickly!