ASTM A403 WP316L-S Stainless Steel 180 Degree Return Bend For Oil Gas Industry

Product Specification

ASTM A403 WP316L-S Stainless Steel 180 Degree Return Bend For Oil&Gas Industry

ASTM A403 WP316L-S 180° Return Bend is a type of stainless steel pipe fitting used in high-pressure and corrosive environments. Here's a detailed breakdown:

1. Material ASTM A403 WP316L

(1). Chemical Composition (%)

The composition of WP316L must meet the following limits (ASTM A403/A403M):

Key Notes:

Low carbon (≤0.03%) prevents carbide precipitation during welding (sensitization resistance).

Molybdenum (2-3%) enhances corrosion resistance, especially against chlorides and acids.

Nickel (10-14%) stabilizes the austenitic structure, improving toughness.

(2). Mechanical Properties (ASTM A403 WP316L-S)

Additional Notes:

Heat Treatment: Solution annealed at 1900–2100°F (1040–1150°C) followed by rapid quenching for optimal corrosion resistance.

Impact Testing: Not typically required unless specified (e.g., for cryogenic applications).

Pressure Ratings: Depend on pipe schedule (e.g., Sch 10S, 40S, 80S) per ASME B16.9/B16.11.

Comparison with 316 vs. 316L

2. 180° Return Bend

• A U-shaped fitting that reverses flow direction by 180 degrees.
• Used in piping systems where a complete turnaround is needed (e.g., heat exchangers, condensers).
• Comes in short-radius (SR) or long-radius (LR) variants.

Key Features of 180° Return Bend

✔ High corrosion resistance (ideal for chemical, marine, and food processing industries).
✔ High-temperature strength (suitable for boilers, refineries).
✔ Smooth internal surface (minimizes turbulence and erosion).

Common Standards & Dimensions

ASME B16.9 (factory-made wrought butt-welding fittings).

ASME B16.11 (forged fittings, though return bends are typically butt-welded).

Equivalent Grades

EN 1.4404 (European standard for 316L).

UNS S31603 (Unified Numbering System).

This fitting is widely used in oil & gas, pharmaceuticals, and wastewater treatment due to its durability and resistance to pitting/crevice corrosion.

Primary Applications

✔ Chemical & Petrochemical Industry

• Acid & Alkali Transport: Resists corrosion from sulfuric, hydrochloric, and phosphoric acids.
• Chloride Environments: Ideal for brine, seawater, and chlorine-handling systems.
• High-Purity Processes: Used in reactors, distillation columns, and heat exchangers.

✔ Oil & Gas (Including Offshore)

• Seawater Cooling Systems: Resists pitting/crevice corrosion in offshore platforms.
• Refinery Piping: Handles sour gas (H₂S) and corrosive hydrocarbons.
• Subsea Equipment: Low carbon content prevents weld decay in underwater installations.

✔ Pharmaceutical & Biotechnology

• Sanitary Process Lines: Smooth internal surface prevents bacterial buildup (meets FDA/USP standards).
• CIP/SIP Systems: Withstands frequent sterilization (steam, chemicals).

✔ Food & Beverage Processing

• Dairy & Brewing: Resists lactic acid, caustic cleaners, and fermentation byproducts.
• Sugar & Salt Processing: Handles corrosive sucrose brines and chlorides.

✔ Power Generation

• Condenser & Boiler Systems: Manages high-temperature/pressure steam and cooling water.
• Flue Gas Desulfurization (FGD): Resists sulfur compounds in exhaust scrubbers.

✔ Marine & Desalination Plants

• Seawater Pipelines: Prevents biofouling and saltwater corrosion.
• Reverse Osmosis (RO) Systems: Used in high-pressure brine recirculation loops.

Why WP316L-S 180° Return Bend?

180° U-Turn Design: Allows compact flow reversal in limited spaces (e.g., heat exchanger bundles).

Schedule 10S/40S/80S Compatibility: Matches standard stainless steel piping systems.

Superior Corrosion Resistance: Molybdenum (2–3%) enhances performance in chloride-rich environments.

Low Carbon (316L): Eliminates carbide precipitation during welding, critical for ASME B31.3 process piping.