A563M-10S M64 M90 Heavy Hex Nuts For ASTM A325M Bolts BLACK ZP YZP

Product Specification

A563M-10S HEAVY HEX NUTS M90 M64 BLACK

Specification

ASTM A563M Heavy Hex Nuts (Metric)

for use with ASTM A325M Bolts

This ASTM A563 and ASTM A563M heavy hex nuts specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.

Note 1: Throughout this specification, the term class means property class.

Note 2: Requirements for the four classes 5, 9, 10, and 12 are essentially identical with requirements given for these classes in ISO 898/II. Requirements for Classes 8S and 10S are essentially identical with requirements in an ISO 4775 Hexagon Nuts for High-Strength Structural Bolting with Large Width Across Flats, Product Grade B, Property Classes 8 and 10. Classes 8S3 and 10S3 are not recognized in ISO standards.

1.2 Classes 8S3 and 10S3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to those of the steels covered in Specification A 588/A 588M. The atmospheric corrosion resistance of these steel’s substantially is better than that of carbon steel with or without copper addition. and when properly exposed to the atmosphere, these steels can be used bare (un-coated) for many applications.

1.3 The nut size range for which each class is applicable is given in the table on mechanical requirements.

Notes:

1. The nuts will generally conform to ANSI B18.2.4.1M – Metric Heavy Hexagonal Nuts

2. Thread will conform to class 6H of ANSI B1.13M for Coarse Series

3. Material & Heat Treatment: To achieve mechanical properties of Properties Class 8S or 10S of ASTM A563M.

4. Nuts of Property Class 8S are used with bolts of ASTM A325M – Type 1 (uncoated). Nuts of Property Class 10S are used with bolts of ASTM A325M – Type 1(Zinc– coated) (in general nuts of a higher property class can replace nuts of a lower property class in a joint).

5. In Bolt/Nut assembly, tightening should be done by rotation of nut.

6. Sizes in brackets are non preferred standards.

7. All dimensions are in millimeters.

A563M Nut Dimension Classes 8S & 10S

Process flow

Cold forging

Annealing treatment(if need) ➨ wiredrawing ➨ clod forging ➨ tapping ➨make heat treatment(if need) ➨ Finish ➨ Packing

Hot forging

Cutting material ➨ hot forging ➨ turning ➨ tapping ➨ make heat treatment(if need) ➨ Finish ➨ Packing

Product Grade

A563M 8S     A563M 10S

Materials and Chemical compstition

1035

10B21

1045

40CR

35CRMO

42CRMO

Finish

BLACK HDG ZP YZP

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

The advantages of QBH

• QBH brand sales to the main quality assurance.
• Years of export trade management, excellent service, word-of-mouth guarantee.
• By working with TUV,escort for quality.
• Customization of non-standard parts can be made according to customer's requirements and drawings.
• For quality customers,we can provide a certain credit period.

Product application

ASTM A563M Heavy Hex Nut

ASTM A563M Heavy hex Nut specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel.

These nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.

Astm A563M Materials shall be tested and the individual grades shall conform to specified values of material such as hardness and proof load, chemical, and mechanical requirements. Classes 8S, 8S3 and 10S, 10S3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to those of the steels. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition. When properly exposed to the atmosphere, these steels can be used bare (un-coated) for many applications.

FAQ