Yixing Boyu Electric Power Machinery Co.,LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 100sets/month. |
| Delivery Time | 15~25 days |
| Packaging Details | Container |
| Product type | Tension Machine For Transmission Line Construction |
| Maximum continuous tension | 120KN |
| Total weight | 8100kg |
| Groove numbers | 15 |
| Maximum back pulling force | 90kn |
| Maximum payoff speed | 5km/h |
| Brand Name | BOYU |
| Model Number | TY1x120III |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Single Cylinder Diesel Engine Puller Tensioner Speed Reducer German Rexroth
3200kg Overhead Line Stringing Equipment 30kn Hydraulic Puller Tensioner
Stringing Power Line 5 Groove Hydraulic Wire Tensioner Hydraulic Pump Tianjin
103hp Cummins Engine Hydraulic Cable Tensioner Transmission Line Stringing
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100sets/month. |
| Delivery Time | 15~25 days | Packaging Details | Container |
| Product type | Tension Machine For Transmission Line Construction | Maximum continuous tension | 120KN |
| Total weight | 8100kg | Groove numbers | 15 |
| Maximum back pulling force | 90kn | Maximum payoff speed | 5km/h |
| Brand Name | BOYU | Model Number | TY1x120III |
| Certification | ISO9001 | Place of Origin | China |
| High Light | cummins engine hydraulic cable tensioner ，transmission line construction hydraulic cable tensioner ，cummins engine hydraulic wire tensioner | ||
Cummins Engine Tension Machine For Transmission Line Construction Max Back Pulling Speed 3km/h
| Main technical performance | Maximum intermittent tension | 130KN |
| Maximum continuous tension | 120KN | |
| Corresponding speed | 2.5km/h | |
| Maximum payoff speed | 5km/h | |
| Corresponding tension | 60KN | |
| Maximum back pulling force | 90kn | |
| Maximum back pulling speed | 3km/h | |
| Diameter of tensile force wheel | 1500mm | |
| Groove numbers | 15 | |
| Maximum applicable diameter of wire | 40mm | |
| Transport dimensions | Length: 5300mm | |
| Width: 2300mm | ||
| Height: 2600mm | ||
| Total weight | 100kg | |
| Engine | Model | Cummins 4BTA3.9-C130 |
| Rated power | 97kw/2500rpm | |
| Transmission System | With closed double-loop hydraulic transmission system and planet decelerator, tension wheel is driven by primary gear. With inversion, the magnitude of reverse traction force is led by exit pressure of pump. In tension condition, hydraulic motor rotation is driven by the tension wheel; the magnitude of tension is controlled by regulating the motor exit pressure. | |
| Main pump | Type | Hydraulic control bidirectional variable plunger pump(Germany Rexroth) |
| Model | A4VG71EP4/32R | |
| Hydraulic motor | Type | Two-way Quantitative Plunger Piston Motor (Germany Rexroth) |
| Model | A2FM180/61W | |
| Speed reducer | Type | planet Gear Decelerator (Italy Bonfiglioli) |
| Model | 310 L2 | |
| Reduction ratio | 28 | |
| Brake opening pressure | 1.8MPA | |
| Electrical System | System voltage | 24V |
| Storage battery | 6-QA-110(2 sets) | |
| Diesel engine starting | 24V electric starting | |
Operate Accord to the Followed Order when Starting
1. After fixed the tension machine, open the “power” switch, pull the start switch to start diesel engine and observe whether the index on the displays is normal.
2. Put all the control handles in the control box in starting position, including:
(1) Put engine throttle in minimum position (idle speed).
(2) Rotate the knob “PULLING HANDLE” to median position, that is position of “TENSION”.
(3) Loosen all the “TENSION REGULATIONT” ” REGULATION OF REEL WINDER PRESSURE”.
(4) Rotate the knob “BRAKE” to the position of “Brake”.
3. Keep the engine in idle speed for 1-2 minutes after starting and observe whether the displays of the instruments are normal at the same time. Pay attention that the index of "BEAKE PRESSURE" can’t be lower than 1.8MPa or higher than 2.5MPa; Otherwise, it is necessary to stop the machine for inspection.
4. Within 10 seconds, if the engine failed to start, the knob should be released immediately and started for a second time after one minute. If it couldn’t start three times in a row, it should be stopped and the operators must find out the reasons, debug them and start later.
5. When delivering under tension, the brake should be released at first. The method is as following: Rotate "Brake" to "Release" position, observe whether the readings of "Brake Pressure" are not less than 3.5Mpa, if the brake pressure had declined, it needs shutdown inspection.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1997
Total Annual:
15000000-20000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Established in 1993, Yixing Boyu Electric Power Machinery Co., Ltd. is a manufacturer specialized in the research, development and production of Electric Power Machinery, CE certified. We are located in beautiful and rich city: Yixing city. We are a High-tech enterprise in Jiangsu Province, with ... Established in 1993, Yixing Boyu Electric Power Machinery Co., Ltd. is a manufacturer specialized in the research, development and production of Electric Power Machinery, CE certified. We are located in beautiful and rich city: Yixing city. We are a High-tech enterprise in Jiangsu Province, with ...
Get in touch with us
Leave a Message, we will call you back quickly!