YUHONG HOLDING GROUP CO., LTD
| Payment Terms | T/T, L/C AT SIGHT |
| Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity |
| Packaging Details | Steel frame wooden case with plastic cap |
| Material | Carbon steel (P265GH grade) |
| Manufacturing | Seamless tube formed into a U-bend, usually by cold bending |
| Heat Treatment | Normalized / normalized & tempered to improve toughness and strength. |
| Pressure & Temperature | Suitable for moderate to high pressure and temperature service (typically up to around 450°C). |
| Brand Name | YUHONG |
| Model Number | EN 10216-2 P265GH |
| Certification | ISO 9001/TUV/PED |
| Place of Origin | China |
View Detail Information
Explore similar products
Customized Boiler Membrane Water Wall Panels Boiler Water Wall Tube Easy
A213 Gr.T5 Cr-Mo Alloy Steel Seamless Boiler Tubes Used In Heat Recovery Steam
A179 Cold Bend Pipe Seamless Low Pressure Steam Boiler Superheater Tubes
ASME SA213 TP347H Stainless Steel Boiler Tube For Fired Heater Radiant Section
Product Specification
| Payment Terms | T/T, L/C AT SIGHT | Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity | Packaging Details | Steel frame wooden case with plastic cap |
| Material | Carbon steel (P265GH grade) | Manufacturing | Seamless tube formed into a U-bend, usually by cold bending |
| Heat Treatment | Normalized / normalized & tempered to improve toughness and strength. | Pressure & Temperature | Suitable for moderate to high pressure and temperature service (typically up to around 450°C). |
| Brand Name | YUHONG | Model Number | EN 10216-2 P265GH |
| Certification | ISO 9001/TUV/PED | Place of Origin | China |
| High Light | EN 10216-2 U Shaped Tube ，P265GH U Shaped Tubes ，Normalized u bend tube | ||
What is EN 10216-2 P265GH U-Bend Tube?
EN 10216-2: European standard for seamless carbon steel tubes for pressure applications with specified elevated temperature properties.
P265GH: Carbon steel grade with good weldability and suitable for high-temperature pressure applications (yield strength ≥ 265 MPa).
U-Bend Tube: A tube bent into a U shape, commonly used in compact heat exchanger and boiler designs to allow directional changes without welds.
Why Use U-Bend Tubes?
Compact design: Saves space by reversing flow direction within small areas.
No welded joints: Maintains structural integrity under pressure and thermal cycling.
Good thermal expansion accommodation: The bend helps absorb expansion and contraction during operation.
Cost-effective installation and maintenance in boiler and heat exchanger systems.
Summary Table of EN 10216-2 P265GH U-Bend Seamless Tube
| Property | Detail |
|---|---|
| Standard | EN 10216-2 |
| Grade | P265GH |
| Form | Seamless, U-bend bent tube |
| Material Type | Carbon Steel |
| Heat Treatment | Normalized or normalized & tempered |
| Operating Temp | Up to ~450°C |
| Applications | Boiler coils, heat exchangers, pressure piping |
Chemical Composition of EN 10216-2 P265GH
| Element | Min (%) | Max (%) |
|---|---|---|
| Carbon (C) | — | 0.22 |
| Manganese (Mn) | 0.60 | 1.30 |
| Silicon (Si) | — | 0.40 |
| Phosphorus (P) | — | 0.025 |
| Sulfur (S) | — | 0.015 |
| Copper (Cu) | — | 0.30 |
| Nickel (Ni) | — | 0.30 |
| Chromium (Cr) | — | 0.30 |
| Molybdenum (Mo) | — | 0.08 |
| Vanadium (V) | — | 0.05 |
Mechanical Properties of EN 10216-2 P265GH
| Property | Value | Test Condition |
|---|---|---|
| Yield Strength (Rp0.2) | ≥ 265 MPa | Tensile test |
| Tensile Strength (Rm) | 410 – 560 MPa | Tensile test |
| Elongation (A) | ≥ 22% | Tensile test |
| Impact Energy (Charpy V-notch) | ≥ 27 J @ 20°C | Impact test (if required) |
Typical Applications of EN 10216-2 P265GH U-bend Tube
Boiler tubes: U-bend tubes form part of superheater, reheater, or economizer coils.
Heat exchangers: U-bends provide compact coil arrangements improving heat transfer efficiency.
Pressure vessels and piping systems: Especially where directional changes of tubes are needed without welding joints.
Power plants, petrochemical plants, and industrial heating systems.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1990
Total Annual:
50M-75M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. ... Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. ...
Get in touch with us
Leave a Message, we will call you back quickly!