Shenzhen FRIDA LCD Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000pcs |
| Delivery Time | 5work days |
| Packaging Details | 20pcs/box |
| Outline Dimension | 263.4 ×157.22 ×2.6(typ.)mm |
| Active area | 256.32(H) ×144.18(V)mm |
| Number of pixels | 1920(H) ×1080(V) |
| Luminance | 220nit |
| Viewing Angle | 89/89/89/89 |
| NTSC Ratio | 72% |
| Brand Name | BOE |
| Model Number | M116B30-040-121-0102 |
| Certification | ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
12.1 Inch Lcd Screen 1280x800 Lvds Interface 20 Pins Industrial Medical Lcd
10.1 Inch Tft Lcd Display 1280x800 With Edp Interface 30 Pins 250 Nits
10.1 Inch IPS Tft Screen 1280x800 Lvds Interface 40 Pins EJ101IA-01G
19" 30 Pins TFT Color LCD 1280x1024 All Viewing Angle 16.7m Lvds Screen
Product Specification
| Payment Terms | T/T | Supply Ability | 5000pcs |
| Delivery Time | 5work days | Packaging Details | 20pcs/box |
| Outline Dimension | 263.4 ×157.22 ×2.6(typ.)mm | Active area | 256.32(H) ×144.18(V)mm |
| Number of pixels | 1920(H) ×1080(V) | Luminance | 220nit |
| Viewing Angle | 89/89/89/89 | NTSC Ratio | 72% |
| Brand Name | BOE | Model Number | M116B30-040-121-0102 |
| Certification | ROHS | Place of Origin | China |
11.6 Inch 1920x1080 Tft Display All Viewing Angle 30 Pin Edp 220 Nit
General Description:
M116B30-040-121-0102 is an 11.6-inch liquid crystal module product using TFT-LCD technology, with display resolution of 1920(H)×1080(V),effective area 256.32(H) x 144.18(V) mm, pixel spacing 0.1335(H) x 0.1335(V) mm, pixel configuration R, G, B vertical stripe, display mode normal black, front surface treatment polarizer anti-glare coating :(3H).
Specifications:
| Parameter | Specification | Unit | Note |
| Display size | 11.6” (Diagonal) | inch | |
| Active area | 256.32(H) ×144 . 18(V) | mm | |
| Pixel Format | 1920(H) ×1080(V) (1pixel = R + G + B dot) | pixel | |
| Pixel pitch | 0.1335(H) x 0.1335 (V) | mm | |
| Pixel configuration | R, G, B vertical stripe | ||
| Display mode | Normally black | ||
|
Surface treatment of front polarizer |
Anti-glare coating: (3H) |
Interface Connection:
| Pin No. | Symbol | I/O | Function | Remark |
| 1 | CABC_EN / NC | - | Reserved for CD | [Note1] |
| 2 | H_GND | P | High Speed round | [Note2] |
| 3 | Lane1_N | I | Complement Signal Link Lane 1 | |
| 4 | Lane1_P | I | True Signal Link Lane 1 | |
| 5 | H_GND | P | High Speed round | [Note2] |
| 6 | Lane0_N | I | Complement Signal Link Lane 0 | |
| 7 | Lane0_P | I | True Signal Link Lane 0 | |
| 8 | H_GND | P | High Speed round | [Note2] |
| 9 | AUX_CH_P | I | True Signal Auxiliary Channel | |
| 10 | AUX_CH_N | I | Complement Signal Auxiliary Channel | |
| 11 | H_GND | P | High Speed round | [Note2] |
| 12 | LCD_VDD | P | LCD logic and driver power(3.3V) | |
| 13 | LCD_VDD | P | LCD logic and driver power(3.3V) | |
| 14 | NC | I | Reserved for LCD manufacturer’s use | [Note1] |
| 15 | LCD_GND | P | LCD logic and driver ground | |
| 16 | LCD_GND | P | LCD logic and driver ground | |
| 17 | HPD | O | HPD signal pin | |
| 18 | LED-1 | P | Backlight ground | |
| 19 | LED-2 | P | Backlight ground | |
| 20 | LED-3 | P | Backlight ground | |
| 21 | LED-4 | P | Backlight ground | |
| 22 | BL_ENABLE | I | Backlight on/off | |
| 23 | BL_PWM_DIM | I | System PWM | |
| 24 | SCL/NC | - | Reserved for LCD manufacturer’s use | [Note1] |
| 25 | SDA/NC | - | Reserved for LCD manufacturer’s use | [Note1] |
| 26 | BL_PWR | P | Backlight power | |
| 27 | BL_PWR | P | Backlight power | |
| 28 | BL_PWR | P | Backlight power | |
| 29 | BL_PWR | P | Backlight power | |
| 30 | NC | - | Reserved for LCD manufacturer’s use | [Note1] |
CN1 (eDP signals , +3.3V DC power supply and B/L power supply)
[Note]:P: POWER I: Input O: Output
[Note1] Don’t input any signals or any powers into a NC pin. Keep the NC pin open.
[Note2] The shielding case is connected with signal GND.Connector used :20455-030E-76(I-PEX),Corresponding connector : 20453-030T (I-PEX)
Absolute Maximum Ratings:
| Parameter | Symbol | Condition | Ratings | Unit | Remark | |
| MIN | MAX | |||||
| +3.3V supply voltage | VDD | Ta=25C | -0.3 | +3.6 | V | |
| Backlight supply voltage | VBL | Ta=25C | -0.3 | +21 | V | |
| Input voltage(eDP) | VI | Ta=25C | -0.3 | +1.5 | V | |
| Input voltage(BL) | VBL_I | Ta=25C | -0.3 | VDD+0.3 | V | |
| Storage temperature | Tstg | -10 | +60 | ℃ |
|
|
| Operation temperature | Topa | 0 | +50 | ℃ | ||
TFT-LCD Panel Driving:
| DC Electrical Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| +3.3V supply voltage | VDD | +3.0 | +3.3 | +3.6 | V | |
| Permissible input ripple voltage | VRP | - | - | 100 | mVp-p | VDD=+3.3V |
| eDP HPD Signal Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| HPD High level output voltage | VOHHPD | VDD-0.1 | ||||
| HPD Low level output voltage | VOLHPD | |||||
| eDP AUX Channel Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Unit Interval for AUX channel | UIAUX | 0.4 | 0.5 | 0.6 | S | |
| Peak-to-peak voltage at TP1 | VAUX-DIFF-pp | 0.32 | - | 1.36 | V | |
| AUX DC Common mode Voltage | VAUX-DC-CM | 0 | - | 2.0 | V | |
| AUX Short current limit | IAUX_SHORT | - | - | 90 | mA | |
| AUX CH termination DC resistor | RAUX_TERM | - | 100 | - | Q | Differential input |
| AUX AC coupling capacitor | CAUX | 75 | - | 200 | nF | |
| Number of pre-charge pulses | Pre-charge pulses | 10 | - | 16 | - | |
| eDP AUX Channel Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Link clock down spreading | Down_Spread_Am plitude | 0 | 0.5 | % | ||
| Differential Peak-to-peak Input Voltage at Rx package pins | VRX-DIFFp-p | 90 | 1200 | mV | ||
| Differential Return Loss at 1.35GHz at Rx package pins | RLRX-DIFF | 9 | - | - | dB | |
|
Differential termination resistance |
RRX-TERM | - | 100 | - | Q | |
| RX short circuit Current Limit | IRX-SHORT | - | 50 | mA | ||
| Lane Intra-pair Skew at RX package pins | TRX-SKEW- NTRA- PAIR-High-Bit-Rate |
- |
- |
TBD | ps | |
Backlight Driving:
The backlight system is an edge-lighting type with white-LED.
(It is usually required to measure under the following condition: Ta=25C±2C)
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Supply voltage | VBL | 7.0 | 12.0 | 21.0 | V | |
|
Current dissipation |
IBL |
- |
(227) | (251) | mA | VBL=12V Duty Ratio=100% |
| (135) | (135) | mA | VBL=7.9V Duty Ratio=40% | |||
| Modulated light signal voltage | VPWM H | 1.85 | - | VDD | V | |
| VPWM L | 0 | - | 0.7 | V | ||
| Brightness Control Duty Ratio | Duty | 1 | - | 100 | % | [Note6-3-1] |
| Brightness Control pulse width | TPWM | 5 | - | - | ps | [Note6-3-2] |
| Brightness Control frequency | PWM | 200 | - | 2,000 | Hz | |
| LED-BL ON/OFF High voltage | VCNT H | 1.8 | 3.3 | 3.6 | V | [Note6-3-3] |
[Note6-3-1]Vpwm Input : 100%= Max luminance 1%= Min luminance
[Note6-3-2]The minimum value of the dimming signal pulse width is assumed regulations of the width of high and the width of low.
[Note6-3-3]VCNT Input : High = BL turn on, Low or OPEN =BL turn off
VBL-dip conditions
Optical Specification:
| Paramete | Conditions | Min. | Typ. | Max. | Unit | |
|
Viewing Angle(CR>10) |
Horizontal | L | - | 89 | - |
degree |
| R | - | 89 | - | |||
| Vertical | T | - | 89 | - | ||
| B | - | 89 | - | |||
| Contrast Ratio | Center | 700 | 1000 | - | - | |
| Response Time | Tr+Td | - | 25 | ms | ||
|
CF Color Chromaticity(CIE1931) |
Red x |
Typ. -0.05 |
TBD |
Typ. +0.05 |
- | |
| Red y | TBD | - | ||||
| Green x | TBD | - | ||||
| Green y | TBD | - | ||||
| Blue x | TBD | - | ||||
| Blue y | TBD | - | ||||
| White x | (0.313) | - | ||||
| White y | (0.329) | - | ||||
| NTSC ratio | % | (72) | - | |||
| Luminance of white | YLI | 220 | cd/m | |||
The measurement shall be taken 30 minutes after lighting the module at the following rating.
Condition: PWM Duty = 100%
The optical characteristics shall be measured in a dark room or equivalent.
Matters Needing Attention:
1.Be sure to turn off the power supply when inserting or disconnecting the cable.Please insert for too much stress not to join a connector in the case of insertion of a connector.
2.The polarizer surface on the panel is treated with Anti-Glare. In case of attaching protective board over the LCD, be careful about the optical interface fringe etc. which degrades display quality.
3.Do not expose the LCD module to a direct sunlight, for a long period of time to protect the module from the ultra violet ray.
Reliability Test Items:
| No. | Test Item | Conditions |
| 1 | High temperature storage test | Ta=60℃ 72h |
| 2 | Low temperature storage test | Ta=-10℃ 72h |
| 3 |
High temperature & high humidity operation test |
Ta=40℃90%RH 72h (No condensation) |
| 4 | High temperature operation test | Ta=50℃ 72h |
| 5 | Low temperature operation test | Ta=0℃ 72h |
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
30000000-35000000
Employee Number:
245~295
Ecer Certification：
Active Member
Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201... Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201...
Get in touch with us
Leave a Message, we will call you back quickly!