Wuhan Global Metal Engineering Co., Ltd
| Payment Terms | L/C, T/T,PAYPAL |
| Supply Ability | 100000pcs |
| Delivery Time | 10 working days or above |
| Packaging Details | Carton or wooden crate or as per your request |
| Product Name | Diameter 6.6mm Stainless Steel Sheath Flexible Manifold Tubular Heater For Hot Runner |
| Application | Industrial heating elements |
| Sheath material | Incoloy 800, SS 304, SS 321, SS 316 |
| Voltage | Customized |
| Resistance Wire | Ni80Cr20 |
| Power | Customized |
| Brand Name | GME |
| Certification | ISO9001/CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Electric furnace Tubular Heater Elements 1800c heating element rod for melting
Infrared Quartz Tube Heating Element Quartz Radiation Element
SS Braided Surface Flexible Tubular Heater For Hot Runner Manifolds
Anti Corrosion Tubular Heating Element Coated Ptfe For Electroplating Industry
Product Specification
| Payment Terms | L/C, T/T,PAYPAL | Supply Ability | 100000pcs |
| Delivery Time | 10 working days or above | Packaging Details | Carton or wooden crate or as per your request |
| Product Name | Diameter 6.6mm Stainless Steel Sheath Flexible Manifold Tubular Heater For Hot Runner | Application | Industrial heating elements |
| Sheath material | Incoloy 800, SS 304, SS 321, SS 316 | Voltage | Customized |
| Resistance Wire | Ni80Cr20 | Power | Customized |
| Brand Name | GME | Certification | ISO9001/CE |
| Place of Origin | China | ||
| High Light | thermostatic tubular heater ，tubular heater elements | ||
Diameter 6.6MM Stainless Steel Sheath Flexible Tubular Heater For Hot Runner Manifold
Produce Description
Tubular heating elements perform exceptional heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces. Tubular heating elements are also used for radiant heating in open air or in vacuum atmospheres.
It is the most versatile heating appliance among all electric heating elements.In most heater assemblies, tubular element design configurations vary — round, triangular, flat press and formed.
Tubular heater is used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time. Even though tubular heaters are technically rather mature and universal to use, there exist various new innovative solutions for many applications. Screw in tubular heaters are standardized for use in liquids like water. Finned tubular heaters are especially for air heating cabinets or tunnels. Flanged heater are easy to install, control and maintain, unique designer as your requirement. For corrosive environment, titanium material or tubular heating elements with additional sleeving are available .
Specification
|
Heat intensity |
Not exceeding 30Wcm2 (advisable) |
|
Power |
Depends on the dimension |
|
Escape of current (when cold) |
<=0.1mA a 242 v. |
|
Insulation (when cold) |
5 Min Ohmis 500 Watts minimum |
|
Dielectric strength |
1500v. 1/seg |
|
Working temperature |
750ºG max. |
|
Tolerance of length |
+/-1.5% |
|
Tolerance of diameter |
-0.01 a -0.06 m/m |
|
Tolerance of cut of connection |
+/-15 mlm |
|
Power tolerance (w) |
5 % - 10 % |
|
Cold areas |
Depends on length and diameter 5-25mm |
Technical Data for Flexible Manifold Tubular Heater
| Length | 300-1550mm | 400-2100mm |
| Max Current | 12A | 15A |
| Nominal Voltage | Less than 230V | Less than 400V |
| Wattage | ±10% | ±10% |
| Dielectric Strength | 1.5HV | 1.5HV |
| Insulation MΩ | More than 5 MΩ | More than 5 MΩ |
| More than 5 MΩ | Less than 0.5 mA | Less than 0.5 mA |
| Minimum Unheated | 30mm | 35mm |
| Terminal Pins | M3 x .50mm / plain post | M4 x .70mm |
Feature
1. Designed and built for safety.
2. Broad variety of sizes for different applications;
3. Compact;
4. Easy to maintain;
5. Energy -saving, efficient
6. Flexible tubular heater should be protected against damp during storing or installing to ensure the performance of the heater.
7. In order to be sure of well-distributed load of each and groups heater should be divided before assembling.
8. The tolerance of the resistance of each one can not exceed by 10% each other.
9. At the beginning of the operating the electric furnace , the voltage should be increased slowly and can not be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater
10 . Heater is hard and brittle, please be careful when assembling and maintaining so as to avoid damage.
11.When heater is damaged and need to be changed , the resistance of new heater should follow the increasing resistance. If many are damaged or resistance increased too much, all the heater should be changed.
Application
1. plastic processing and packaging machinery
2. Plastic processing machinery;
3. Water heating appliances;
4. Packaging machineries;
5. Heating chemical solutions;
6. Kitchen appliances;
7. Medical areas;
8.extruders;
9.foundaries;
10.for fastening of Turbine Bolts;
11.Soldering pots;
12.injection blow moulding;
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
1995
Total Annual:
5000000-10000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995. Our main products include but not limited to Coil heater, Cartridge heater, Flexible T... Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995. Our main products include but not limited to Coil heater, Cartridge heater, Flexible T...
Get in touch with us
Leave a Message, we will call you back quickly!