GR1 GR2 GR3 GR4 Titanium Plate ASTM B265 TKH 0.01mm Above For Petroleum

Product Specification

GR1 GR2 GR3 GR4 Titanium Plate ASTM B265 TKH 0.01mm above For Petroleum

Standard: ASTM B265

Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr12, Gr23, BT1-00 BT1-0 BT1-2

Size: Tkh:0.01mm above, width: <2500mm, length: <6000mm

Introduction

ASTM B265 titanium plates are distinguished by their lightweight nature, weighing only half as much as steel, yet possessing high strength and robust resistance to heat, cold temperatures, and corrosion. Due to these attributes, they are often referred to as "future metals." The ASTM B265 standard is specifically for industrial applications of titanium plates and sheets. Pure titanium plates offer significant plasticity, with high-purity titanium capable of achieving an elongation rate of 50-60%. However, the strength and hardness of pure titanium are inferior to those of titanium alloy plates.

Titanium alloy plates are engineered by stringently controlling impurity levels and incorporating specific alloying elements. Impurities in titanium can significantly influence its mechanical properties. In particular, elements such as oxygen, nitrogen, and carbon can substantially enhance the strength of titanium, albeit at the expense of reduced plasticity. As a result, titanium alloy plates exhibit superior mechanical characteristics.

Specifications

Grade: pure titanium-Gr1 Gr2 Gr3 Gr4

alloy titanium- Gr5 Gr7 Gr9 Gr12 Gr23...

Standard: ASTM B265, industrial uses standard

Technique: Hot/Cold Rolled; Annealed

Regular size:

T (0.3 - 0.5mm)*W(400 - 600mm)*L(1500mm)

T (0.6 - 0.8mm)*W(400 - 800mm)*L(1200mm)

T (0.9 - 6.0mm)*W(400 - 1000mm)*L(1000 - 3050mm)

T (6.1 - 15 mm)*W(400 - 2000)*L(1000 - 6000mm)

T (16 - 60mm)*W(400 - 2800)*L(1000 - 5600mm)

Finished: Bright, Polished, Turn smooth (Peeled), Brush, Mill, Pickle

Chemical Composition Of ASTM B265 Titanium Sheet/Plate

Application Of Titanium Sheet/Plate:

Titanium and its alloys, such as those conforming to ASTM B265, are extensively utilized across various industrial sectors, including petroleum, chemical, light industry, metallurgy, and power generation.

In the petrochemical industry, titanium is employed in constructing reactors, pressure vessels, heat exchangers, separator piping, and distillation tower top condenser linings, among other critical components.

The chemical industry also makes significant use of titanium grade 5 plates. Applications include distillation towers, reactors, pressure vessels, heat exchangers, filters, measuring instruments, turbine blades, pumps, valves, pipes, chloralkali production electrodes, synthetic tower linings, and other acid-resistant equipment linings.

Within the paper industry, titanium sheets are integral to equipment like agitators, bleaching towers, distillation towers, reaction tanks, condensers, heat exchange tubes, centrifugal separators, spinnerets, valves, and pumps.

Furthermore, titanium grade 5 plates are utilized in desalination and power plants for their ability to withstand the corrosive nature of seawater. They are used in heat exchangers, condensers, water heaters, pipes, and other related equipment.

The naval ship industry also relies on titanium for its superior strength and resistance to corrosion. Applications here include ship hulls, decks, valves, wings, speedboat propellers, drive shafts, steam engines, deep submarine pressure chambers, and the development of marine equipment.

In summary, the extensive use of titanium across these industries underscores its importance due to its unique combination of properties, such as being lightweight, strong, and highly resistant to both high and low temperatures as well as corrosion.