Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
6L Ultrasonic Cleaner With Intelligent Control, Frequency Sweeping And Degassing Functions – Laboratory And Medical Industry Equipment
Dual Core Technologies of Degassing + Frequency Sweeping: Reconstructing the Logic of Ultrasonic Cleaning
Intelligent Degassing System Equipped with a built-in vacuum degassing pump and liquid level sensor, it can reduce the gas content in the cleaning solution to below 0.5% within 3 minutes (the gas content in conventional solutions is about 5%), achieving three core advantages:
Enhanced Cavitation Effect: After degassing, the energy released by bubble collapse increases by 25%, and the cleaning efficiency at the same power level is improved by 30%. For example, the time required to remove sludge from 0.1mm - deep grooves in bearing raceways is shortened from 15 minutes to 10 minutes.
Protection of Sensitive Materials: It prevents the formation of cavitation pits on the surfaces of easily oxidizable materials such as aluminum workpieces and silver ornaments. The removal rate of the oxidation layer on silver ornaments after degassing cleaning exceeds 99.5%, and no new scratches are generated.
Stable Cleaning Performance: It eliminates the inconsistent cleaning caused by fluctuations in the gas content of the solution. The fluctuation of the yield rate between batches is controlled from ±8% to ±2%, meeting the strict consistency requirements of ISO 13485 for medical device cleaning.
Dynamic Frequency Sweeping Technology Through a broadband transducer array and an AI - based frequency tracking algorithm, it supports full - band scanning from 20 to 80kHz (with an accuracy of ±0.05kHz) and automatically matches the optimal cleaning frequency:
Layered Cleaning of Multiple Contaminant Layers: For example, when cleaning PCB pads, it first breaks down solder balls at 25kHz and then switches to 75kHz to remove ionic residues of soldering flux, reducing the defect rate from 1.1% to 0.08%.
Adaptive Load Adjustment: When the temperature of the cleaning solution changes (such as from 25°C to 60°C) or the liquid level fluctuates (±10%), the system completes frequency calibration within 0.3 seconds, avoiding the decay of cleaning efficiency caused by frequency drift in traditional equipment (the industry - average decay rate is 15%, while this product's is ≤3%).
Penetration of Complex Structures: For precision parts with blind holes deeper than 5mm (such as MIM metal injection - molded parts), the frequency sweeping mode of 35 - 55kHz increases the penetration depth of ultrasonic energy by 40%. The cleanliness at the bottom of blind holes reaches the VDA 19.1 standard (the residual amount of particles > 5μm is < 5 particles/100cm²).
Digital Multi-Functional Series
Model
Capacity
Ultrasonic power
Heating power
Cleaning tank size
Overall dimensions of the machine
Gross Weight
Large box size
L
W
W
(LⅹwⅹH)mm
(LⅹwⅹH)mm
KG
(LⅹwⅹH)mm
JPS-23A
3L
50～120
100
240x135x100
265x162x265
4.0
353×248×348
(1Table)
JPS-36A
6L
70～180
300
300x150x150
325x175x285
6.0
408×273×370(1Table)
JPS-410A
10L
100～240
300
300x240x150
325x265x330
8.0
413×363×428(1Table)
JPS-514A
14L
120～300
300
300×240×200
325×265×380
8.5
423×350×480(1Table)
JPS-615A
15L
150～360
300
330×300×150
355×325×330
11.0
448×413×428(1Table)
JPS-719A
19L
170～420
300
330×300×200
355×325×380
12.0
440×425×480(1Table)
JPS-822A
22L
200～480
600
500×300×150
535×330×340
16.0
628×418×423(1Table)
JPS-1030A
30L
240～600
600
500×300×200
535×330×380
19.0
628×418×468(1Table)
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer
Year Established:
2005
Total Annual:
4,397,596.73-6,397,596.73
Employee Number:
460~500
Ecer Certification：
Verified Supplier
Jietai Ultrasonic was founded in 2005 and specializes in environmental ultrasonic cleaning equipment, wastewater purification equipment, surface treatment equipment, and supporting systems. As a high-tech enterprise integrating R&D, production, sales, and engineering services, we are committed t... Jietai Ultrasonic was founded in 2005 and specializes in environmental ultrasonic cleaning equipment, wastewater purification equipment, surface treatment equipment, and supporting systems. As a high-tech enterprise integrating R&D, production, sales, and engineering services, we are committed t...
