24V Truck AC Comrpessor DCP17084 For Benz Atego For Ljungby For Torreta

Product Specification

24V Truck AC Comrpessor DCP17084 For Benz Atego For Ljungby For Torreta Caterpilla WXMB066
 

Parameter:

Product pictures 

Warranty:

We provide one year quality warrantee. Any question of the product, please first contact us

This warranty is subject to the following conditions and exclusions:

1.The shipping costs for return back to our company is in buyer side

2. If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.

3. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.

As soon as we receive the goods, we will repair or change new part .

4. If the quality or damage caused by improper installation or use, not within the scope of warranty

Automobile air conditioning compressor composition

1. Compressor Housing: The compressor housing encloses all the internal components of the air conditioning compressor and provides support and protection.

2. Compressor Shaft Seal: The shaft seal prevents refrigerant and oil from leaking out of the compressor.

3. Swash Plate: The swash plate is connected to the compressor shaft and helps to regulate the movement of the pistons inside the compressor.

4. Piston Assembly: The piston assembly moves up and down within the cylinders of the compressor to compress the refrigerant gas.

5. Swash Plate Bearings: These bearings support the swash plate and allow it to rotate smoothly.

6. Cylinder Head: The cylinder head contains the reed valves and serves as the top cover of the compressor cylinders.

7. Reed Valves: Reed valves are located in the cylinder head and control the flow of refrigerant gas into and out of the compressor cylinders.

8. Suction and Discharge Ports: These ports enable the entry and exit of refrigerant gas into and out of the compressor cylinders.

9. Clutch Assembly: The clutch assembly engages and disengages the compressor from the engine, allowing the compressor to turn on and off as needed.

10. Electronic Control Module (ECM): The ECM monitors and controls the operation of the air conditioning compressor, ensuring optimal performance and efficiency.

WNRLN Packing

ß ß ßWNRLN packaging and shock-proof foams, which have protective functions.

Their thickness is thicker than ordinary box and foam , Relatively speaking, the quality of WNRLN packaging is better than that of ordinary packaging.

ß ß ß It has the advantages of good stiffness and high wear resistance.

It is deeply loved by domestic and foreign customers.

Exhibition pictures

Why choose us:

1. We have professional testing tools to test every product before delivery. If there is a product quality problem, we know how to deal with it. For details, please pay attention to our warranty solution.
2. We have obtained ISO9001 CQC certificate.
3. We have exclusive packaging and official logistics for many years of cooperation. We can guarantee that the goods will be arrived quickly and safely.
4. OEM is acceptable.
5. We have more than 1,000 different compressor models available.

General system

Each system may vary slightly per vehicle. For example, some may include an orifice tube whereas others have an expansion valve. This means the system has up to 7 components including:

• Compressor: compresses cool refrigerant gas into hot refrigerant gas
• Condenser and fan: converts hot refrigerant gas into a hot liquid at high pressur
• Receiver Dryer: temporarily stores refrigerant when not needed by the system
• Expansion (TX) Valve / Orifice Tube: regulates refrigerant flow / creates pressure drop
• Evaporator: cools air before entering cabin
• Heater Core: warms air before entering cabin (uses engine coolant rather than refrigerant)
• Blower Motor: fans hot or cold air into the cabin

Warranty:

We provide one year quality warrantee. Any question of the product, please first contact us

This warranty is subject to the following conditions and exclusions:

1.The shipping costs for return back to our company is in buyer side

2. If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.

3. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.

As soon as we receive the goods, we will repair or change new part .

4. If the quality or damage caused by improper installation or use, not within the scope of warranty