DVE16 Air Auto Conditioning Compressor 977012S500 For Hyundai For IX35 For

Product Specification

DVE16 Air Auto Conditioning Compressor 977012S500 For Hyundai For IX35 For Tucson WXHY028

Parameter:

When installing an automotive air conditioning compressor, it is not uncommon for there to be some level of noise. However, if the noise is excessive or unusual, it could indicate a problem with the compressor. Here are some steps to detect and repair compressor noise:

1. Visual Inspection: Start by visually inspecting the compressor for any obvious signs of damage, such as leaks, loose components, or worn-out belts. Check all the connecting lines and fittings as well.

2. Listening Test: Listen carefully to the noise produced by the compressor. Pay attention to the type of noise (grinding, squealing, rattling, etc.), the duration, and whether it occurs consistently or intermittently. This will help you identify the potential source of the problem.

3. Pressure Testing: Connect pressure gauges to the high and low-pressure sides of the air conditioning system. Start the engine and turn on the air conditioning. Monitor the pressure readings and compare them to the manufacturer's specifications. If the pressures are too high or too low, it could indicate a problem with the compressor.

4. Vibration Analysis: Excessive compressor noise can sometimes be caused by excessive vibration. Use a vibration analyzer to measure the level of vibration in the vicinity of the compressor. Excessive vibration can be caused by a misalignment of the compressor, worn-out motor mounts, or damaged internal components.

5. Lubrication Inspection: Check the compressor's lubricant level and quality. Low or contaminated lubricant can lead to increased friction and noise. If necessary, drain and replace the lubricant according to the manufacturer's recommendations.

6. Belt and Pulley Inspection: Examine the belt and pulley for any signs of wear, such as cracks, fraying, or misalignment. A loose or damaged belt can cause noise and affect the performance of the compressor. Replace or adjust the belt as needed.

7. Compressor Replacement: If all else fails and the noise persists, it may be necessary to replace the compressor. Consult with a professional technician who can help determine if a compressor replacement is needed.

Please note that these are general guidelines, and it is always recommended to consult with an automotive air conditioning specialist or a qualified technician for a proper diagnosis and repair of compressor noise.

Product pictures

Delivery/ Warehouse

Working principle for AC car compressor

In a closed AC system, the cooling of freon in the evaporator occurs due to a sharp change in pressure: liquid freon under high pressure passes through a narrow opening, atomizing and instantly cooling. The task of the compressor is to pump refrigerant (freon) from the low-pressure circuit (from the condenser radiator) to the high-pressure circuit (to the evaporator radiator) with its simultaneous compression, which means an increase in temperature. In the condenser, the freon is cooled and turns into a liquid state, after which it enters the condenser again. The AC compressor is sometimes referred to as the "heart" of the system, so its smooth operation is so important for the normal operation of the air conditioner. At the same time, the compressor is also heavily loaded.