Lined Ceramic Wear-Resistant Pipe

Product Specification

Product Description

Lined Ceramic Wear-Resistant Pipe is a composite pipe lined with high-purity alumina ceramic (Al₂O₃). Through a special process, the ceramic is bonded to a steel pipe or a rubber layer. It is suitable for conveying highly abrasive and corrosive materials such as slurry, ash, and coal powder. Its wear resistance is over 10 times that of manganese steel pipe, significantly reducing the frequency of downtime and replacement.

Lined Ceramic Wear-Resistant Pipe consists of three layers:
Outer layer: Q235/304/316L seamless steel pipe (pressure-bearing)
Middle: High-strength epoxy adhesive (heat-resistant to 120°C)
Inner layer: 92%-95% Al₂O₃ monolithically sintered ceramic rings/sheets, hardness HRA ≥88, Mohs 9. Sintered at 1700°C, the lining ceramic has a density of 3.7g/cm³, a compressive strength of≥850 MPa, and a flexural strength of≥290 MPa. The ceramic and steel pipes are bonded using a dual-metal mechanical joining and adhesive bonding process to ensure zero detachment under high-speed erosion.

Key Features
Ceramic thickness: 3–25 mm available, with customizable reducers, elbows, tees, and Y-pieces
Diameter range: DN50–DN1200 mm
Operating temperature: -50°C–350°C (special adhesive for heat resistance)
Connections: Flanges, welding, quick connectors, Victaulic clamps
Roughness: Ra ≤ 0.2 μm, resulting in low fluid resistance and low scaling

Ceramic technical parameters

Applications
Thermal Power: Fly ash, limestone slurry, desulfurization circulation pipes
Steel: Blast furnace coal injection, converter dust removal, ash conveying pipes
Ore dressing: Iron/copper/gold ore tailings, concentrate slurry pipes
Coal: Heavy medium coal preparation, gangue backfill pipes
Chemical Industry: Phosphogypsum, titanium dioxide, aluminum hydroxide slurry
Ports: Ship unloader vacuum suction pipes, ore conveying pipes

Why choose us?

Strict quality assurance system

From product design and manufacturing to installation, it is fully incorporated into the ISO quality management system, each process is strictly implemented by the company's procedures and specifications, and strict quality control ensures that each product meets customer requirements. Each product must pass quality inspection before leaving the factory. All new products undergo rigorous wear simulation experiments

Perfect Service:

Our company has a professional technical research and development team and has accumulated more than ten years of experience in equipment anti-wear. According to the on-site information provided by customers, from material selection and design to project budget, we analyze the causes of wear and tear, tailor-made anti-wear solutions, and provide design drawings.

Well-experienced

Focusing on equipment anti-wear, we focus on communication with customers and experience accumulation. Many of our new products are inspired by customers. Iberno has been focusing on equipment anti-wear for more than ten years. The professional team is engaged in the research and development of new materials, friction and wear research, and engineering design. Has extensive experience.

FAQ:

Q1: Will ceramics shatter under high-speed particle impact?
A: Reserve a 3mm rubber buffer layer between the ceramic ring and the steel pipe to absorb impact; There is no record of rupture under the condition of particle velocity ≤ 35 m/s.
Q2: Can we make wear-resistant bent pipes?
A: It can be bent with various radii ranging from R=1.0D to 5D, and the ceramic pieces have a dovetail interlocking structure that never falls off.
Q3: How to check the quality of the lining?
A: Before leaving the factory, each pipeline undergoes 100% endoscopic testing and a 10 MPa water pressure test, with a testing report attached.

Q: What is the service life of wear-resistant ceramic pipes?
A: Under normal operating conditions, its service life can reach 5-10 years, and the specific service life may vary depending on the severity of the operating conditions. Under special working conditions with severe wear and corrosion, it can also ensure stable use for 2-3 years. ​

Q: Is installing wear-resistant ceramic pipes complicated?
It's not complicated. Due to its light weight, the installation process is relatively simple, and suitable installation methods such as welding and flange connection can be selected according to the site conditions. We can also provide professional installation guidance services for customers. ​

Q: What extreme environments can the product adapt to?

A: It can adapt to extreme environments such as high temperature (up to 750 ℃), strong corrosion (various acidic and alkaline media), and high wear (such as transporting high-hardness granular materials), and can operate stably in complex industrial conditions.