Zhengzhou Hengliang Tech Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 30 SET/Month |
| Delivery Time | 5~7days |
| Packaging Details | Wooden box |
| System Name | WIM System |
| System Voltage | AC 220V |
| System Accuracy | 90%~97% |
| System Speed | 0.5~100km/h |
| Axle load | 40T(single axle) |
| Axle max overload | 60T(single axle) |
| MTBF | ≥20000h |
| Working Temperature | -45~+80℃ |
| Brand Name | Hengliang |
| Model Number | ZQS-40-SY |
| Certification | ISO, CE |
| Place of Origin | Zhenghou`China |
View Detail Information
Explore similar products
ISO Bending Plate Weigh In Motion Truck Scales 0.5-105km/H Speed
40T In Motion Axle Scale Weigh In Motion Station Overload Detection
Highway Management WIM System Scales IP68 High Speed Pre Inspection
Single Axle 40 Ton Truck Weigh In Motion Scales For Highway
Product Specification
| Payment Terms | T/T | Supply Ability | 30 SET/Month |
| Delivery Time | 5~7days | Packaging Details | Wooden box |
| System Name | WIM System | System Voltage | AC 220V |
| System Accuracy | 90%~97% | System Speed | 0.5~100km/h |
| Axle load | 40T(single axle) | Axle max overload | 60T(single axle) |
| MTBF | ≥20000h | Working Temperature | -45~+80℃ |
| Brand Name | Hengliang | Model Number | ZQS-40-SY |
| Certification | ISO, CE | Place of Origin | Zhenghou`China |
| High Light | 100km/h Continuous WIM System ，Overload Management WIM System Dynamic Weighing ，Multi Axis Continuous WIM System | ||
Overload Management System Of Multi Axis Continuous Dynamic Weighing
Establish an overrun dynamic fine inspection system based on computer network to automatically monitor illegal and out of gauge transportation of vehicles, realize 24-hour freight vehicle transportation monitoring, form a powerful deterrent, focus on solving the three major problems of shortage of overload control staff, difficulty in obtaining evidence, and safety of overload control, and reduce the rate of out of gauge vehicle transportation.
1. Weighing accuracy
The number of axles, axle load, gross weight of vehicle and cargo, license plate, speed and other information can be measured timely and accurately without stopping, decelerating, driving at a specific speed and in a specific lane. The accuracy is not lower than the national level 5 standard. The vehicle can pass the verification with a type evaluation certificate.
2. Weighing speed adaptability
In order to avoid the detection of off-site law enforcement weighing system, illegal vehicles that exceed the limit often cheat by using super low speed over weighing, high speed post punching and other behaviors. The bidding products can accurately detect the following behaviors, and the accuracy reaches level 5:
1) Be able to weigh accurately when the vehicle is over balanced at super low speed or running and stopping, that is, be able to weigh vehicles of the speed cutoff type (intermittent driving);
2) It can accurately weigh when the vehicle passes at high speed, that is, the maximum detection speed of dynamic weighing reaches 100km/h;
3. Single axle weighing capacity
With the development of vehicle refitting technology and material performance, the vehicle overrun capacity has also been improved. Malignant overrun vehicles with four axles exceeding 100 tons and six axles exceeding 150 tons have also appeared from time to time. The rear axle weight of such vehicles often exceeds 40 tons, causing great damage to roads and bridges. However, the maximum weight of traditional dynamic truck scale is only 40 tons, which cannot accurately weigh such vehicles.
Product Parameters
| Weighing accuracy | 90%~97% |
| Single axle load | 40Ton |
| Single axle max Load | 60Ton |
| Speed | 0.5~100km/h； |
| Speed error | ≤±1km/h |
| Wheelbase error | ≤±100mm |
| Working voltage | AC 220V 50Hz |
| Output information | Speed, total weight, axle load, axle number, wheelbase, vehicle type and passing time |
| Maximum number of lanes | 8 lanes |
| Data storage | It can store up to 10000 pieces of vehicle information data |
| data interface | RJ485 |
| work environment | -45℃～80℃,0～95% |
| Confidence | ≥95% |
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
6300000-7880000
Employee Number:
50~199
Ecer Certification：
Verified Supplier
Zhengzhou Hengliang Tech Co., Ltd is a professional high and new tech enterprise, who specialized in developing, production and sales of quartz sensor (truck scales) , high speed WIM system, low speed WIM system, etc. After 10 years intensive study of piezoelectric material, piezoelectric technolog... Zhengzhou Hengliang Tech Co., Ltd is a professional high and new tech enterprise, who specialized in developing, production and sales of quartz sensor (truck scales) , high speed WIM system, low speed WIM system, etc. After 10 years intensive study of piezoelectric material, piezoelectric technolog...
Get in touch with us
Leave a Message, we will call you back quickly!