Product Specification

DIFFERENT WINDOW FILMS

Different window films vary by material. Dye - based films use color dyes to reduce light transmission, offering basic privacy and UV protection, but have limited heat - blocking and may fade over time. Carbon films incorporate carbon particles, providing better heat insulation and privacy, and they don't interfere with electronic signals. Nano - ceramic films are made from ceramic nanoparticles, delivering superior heat rejection, high - clarity light transmission, and excellent durability. They also avoid signal interference, making them ideal for high - end applications where top - tier performance and long - term reliability are key.

What are the differences between different types of window film?

The main structure of car window film

What are the benefits of car window film?

Here is a brief introduction to the installation method of window film:

• Prepare tools: Gather a squeegee, a sharp knife, a spray bottle filled with soapy water, and a clean, soft cloth.
• Clean the window: Thoroughly clean the window glass with a glass cleaner to remove dust, dirt, and grease.
• Measure and cut: Measure the window size and cut the window film slightly larger than the window.
• Apply the film: Spray the soapy water on the window glass and the adhesive side of the film. Then, carefully attach the film to the window and use the squeegee to smooth it out, expelling air bubbles and excess water.
• Trim the edges: Use the knife to trim the excess film along the window edges.
• Final cleaning: Wipe the window with a clean cloth to remove any remaining water and ensure a clear finish.

Privacy Protection of  Different Window Tint Films VLT:

• Surface preparation: The window surface must be thoroughly clean and free of any dirt, dust, grease, or scratches. Even a tiny particle can cause bubbles or affect the adhesion of the film. Use a mild detergent and a soft cloth to clean the glass, and then rinse it thoroughly with clean water and dry it completely.
• Temperature and humidity: It is recommended to install window film in a room with a temperature between 18 - 28℃. Extreme temperatures, either too hot or too cold, can affect the film's properties and adhesion. High humidity can also cause problems such as slow drying and poor adhesion, so it's best to avoid installation in humid conditions.
• Film handling: Be careful not to touch the adhesive side of the film with your fingers to prevent oil and dirt from transferring onto it, which could affect its adhesion. When cutting the film, make sure the cutting tool is sharp to ensure a smooth and accurate cut. Also, cut the film slightly larger than the window to allow for trimming after installation.
• Installation technique: Spray a sufficient amount of soapy water on both the window surface and the adhesive side of the film to allow for easy positioning and to expel air bubbles. Use a squeegee to smooth the film from the center to the edges, applying even pressure to avoid wrinkles and bubbles. Pay special attention to the corners and edges to ensure a tight fit.
• Post - installation care: After installation, avoid moving or opening the window for at least 24 - 48 hours to allow the film to adhere properly. Do not clean the window film with abrasive cleaners or sharp objects for a few days to prevent scratching the film. Also, keep in mind that it may take a few days for any remaining water bubbles to disappear completely.

YUXINFILM Factory: Premium Dust-Free Paint Protection Film Production Line

Integrated Super Factory & Full Industrial Chain Capability

State-of-the-Art Equipment & Technological Excellence

Expert Teams Driven by Innovation

• Thermoplastic Elastomer Polymer Specialists: Optimizing material properties for superior adhesion, UV resistance, and self-healing performance.
• Mechanical Equipment Engineers: Ensuring precision in every production stage, from extrusion to coating.
• Production Technology Experts: Mastering processes to achieve uniform thickness, flawless surface finish, and consistent product quality.
• Dedicated QC Professionals: Conducting rigorous pre-shipment inspections to guarantee alignment with sample standards and dimensional accuracy (e.g., film length compliance).

Stringent Quality Control (QC)

• Product-Sample Consistency: Ensuring every batch matches the approved prototype in texture, thickness, and performance.
• Spec Compliance: Checking film length, width, and mechanical properties to meet exact customer requirements.
• Dust-Free Purity: Maintaining cleanroom-grade production environments to eliminate surface imperfections.

Rapid Delivery & Inventory Efficiency

FAQ:

• Q1: Can cutomers see samples?
  A: Sure! Request free samples to check quality and appearance before buying.

   

  Q2: Are they safe for family and pets?
  A: Absolutely. Made from non - toxic materials, no harmful emissions. Adds window safety too.

   

  Q3: Will they harm the windows?
  A: No. Non - damaging, removable without residue. Actually protects glass from scratches and impacts.

   

  Q4: How do customers choose the right film?
  A: Depends on needs. High - transmittance for light, medium for balance, low for privacy.